Initialization Signal Detected
Initialization Signal Detected
I verify the CPU and found no bent pins. I changed to a Pentium G2030 but still received two beeps. Now it's unusual—removing all four RAM modules causes continuous beeping, and inserting one restarts the issue with two beeps again. Could it mean all four cards are dead?
This indicates the RAM is working properly. The CPU appears to be fine too. The issue seems to lie with the motherboard. You might attempt resetting the CMOS by connecting the pins in parallel. Disconnect power, press the power button for five seconds, simultaneously touch the CMOS pins using the same tool, keep this for roughly ten seconds, and see if it resolves the problem.