F5F Stay Refreshed Hardware Desktop Initial setup, no video output.

Initial setup, no video output.

Initial setup, no video output.

Pages (2): Previous 1 2
B
Bap56
Member
58
09-10-2022, 04:12 AM
#11
The 8-pin EPS connectors are often divided in half. PCIE connectors separate into two and six sections. Examine your EPS connector closely—usually a latch is visible when it’s split, or you can twist it to separate the parts.
B
Bap56
09-10-2022, 04:12 AM #11

The 8-pin EPS connectors are often divided in half. PCIE connectors separate into two and six sections. Examine your EPS connector closely—usually a latch is visible when it’s split, or you can twist it to separate the parts.

A
astroboy400
Junior Member
11
09-16-2022, 07:15 PM
#12
You might need to divide the 8-pin connection because there’s no direct method. The two cables you have are 8 pins for the CPU power, and you added a 6-pin cable for VGA. The only splits coming from your PSU are the VGA 6+2 connections.
A
astroboy400
09-16-2022, 07:15 PM #12

You might need to divide the 8-pin connection because there’s no direct method. The two cables you have are 8 pins for the CPU power, and you added a 6-pin cable for VGA. The only splits coming from your PSU are the VGA 6+2 connections.

O
oml
Junior Member
17
09-18-2022, 12:43 AM
#13
Are there any unused ports on your motherboard resembling a tiny 24-pin connector at the top?
O
oml
09-18-2022, 12:43 AM #13

Are there any unused ports on your motherboard resembling a tiny 24-pin connector at the top?

P
Pixelplayer145
Member
168
09-18-2022, 04:13 AM
#14
I can't post photos directly, but I can help you find or share images of your motherboard if you provide more details about what you're looking for!
P
Pixelplayer145
09-18-2022, 04:13 AM #14

I can't post photos directly, but I can help you find or share images of your motherboard if you provide more details about what you're looking for!

W
WolfFlufflers
Junior Member
3
10-06-2022, 02:19 AM
#15
I just stripped the MOBO of everything except power and still cannot flash the bios. But here is a picture before I disassembled it. I have the 24 pin on the right, 2 x 8 pin on the top left and I added a 6 pin to the bottom left but that didn't change anything.
W
WolfFlufflers
10-06-2022, 02:19 AM #15

I just stripped the MOBO of everything except power and still cannot flash the bios. But here is a picture before I disassembled it. I have the 24 pin on the right, 2 x 8 pin on the top left and I added a 6 pin to the bottom left but that didn't change anything.

Pages (2): Previous 1 2