F5F Stay Refreshed Hardware Desktop Initial setup, fans aren't connected to the motherboard

Initial setup, fans aren't connected to the motherboard

Initial setup, fans aren't connected to the motherboard

Pages (2): 1 2 Next
G
Gamer_JJ
Junior Member
14
06-23-2021, 05:56 PM
#1
PC components: Mobo - PRIME H610M-E D4 case - Aerocool hive mid tower (includes 3 fans). Fans - aerocool (details unavailable). The pins on this fan don't match the Mobo's, so they won't fit directly. You can link them together, leaving two cables (GDV and a 4-pin with a blank). Do I have to purchase an adapter or change the connections?
G
Gamer_JJ
06-23-2021, 05:56 PM #1

PC components: Mobo - PRIME H610M-E D4 case - Aerocool hive mid tower (includes 3 fans). Fans - aerocool (details unavailable). The pins on this fan don't match the Mobo's, so they won't fit directly. You can link them together, leaving two cables (GDV and a 4-pin with a blank). Do I have to purchase an adapter or change the connections?

R
rubenmortier
Junior Member
5
06-23-2021, 08:17 PM
#2
The top image shows the RGB connector. At the bottom, it can be applied to the CHA header.
R
rubenmortier
06-23-2021, 08:17 PM #2

The top image shows the RGB connector. At the bottom, it can be applied to the CHA header.

C
Coolio4691YT
Junior Member
49
06-24-2021, 03:33 AM
#3
It looks like you have three pin fans that aren't PWM, and they match the 4-pin MMO fan headers. The plug has a slight indentation, so you can fit them in. GDV might mean German for RGB—just plug the RGB header into it.
C
Coolio4691YT
06-24-2021, 03:33 AM #3

It looks like you have three pin fans that aren't PWM, and they match the 4-pin MMO fan headers. The plug has a slight indentation, so you can fit them in. GDV might mean German for RGB—just plug the RGB header into it.

Z
ZockerBuddieYT
Member
55
06-24-2021, 04:02 AM
#4
Consider adjusting the fan pin placement to match the design, since the pin has a clip while the header has a guard. For the GDV cable, check if it needs repositioning or securing based on the new setup.
Z
ZockerBuddieYT
06-24-2021, 04:02 AM #4

Consider adjusting the fan pin placement to match the design, since the pin has a clip while the header has a guard. For the GDV cable, check if it needs repositioning or securing based on the new setup.

J
Jonyv
Member
63
06-24-2021, 03:55 PM
#5
It might be better to use higher quality images. The 3-pin cable should connect to the three outer pins of the four-pin header (if that makes sense). The GDV cable should go into the ARGB/Rainbow header, which has matching round pins. The three-pin version (not RGB with four pins) should be placed in the ARGB/Rainbow slot.
J
Jonyv
06-24-2021, 03:55 PM #5

It might be better to use higher quality images. The 3-pin cable should connect to the three outer pins of the four-pin header (if that makes sense). The GDV cable should go into the ARGB/Rainbow header, which has matching round pins. The three-pin version (not RGB with four pins) should be placed in the ARGB/Rainbow slot.

D
Davidatalla
Junior Member
4
07-02-2021, 02:31 PM
#6
The ARGB setting appears to work correctly now. That issue has been resolved for the fans, as it doesn't show up in your photos. Thank you!
D
Davidatalla
07-02-2021, 02:31 PM #6

The ARGB setting appears to work correctly now. That issue has been resolved for the fans, as it doesn't show up in your photos. Thank you!

T
ThePyromaniaxe
Member
55
07-02-2021, 08:05 PM
#7
It's a PWM 4-pin design, so it should work fine with any SYS or FAN header. Your board appears to be quite old, lacking RGB features.
T
ThePyromaniaxe
07-02-2021, 08:05 PM #7

It's a PWM 4-pin design, so it should work fine with any SYS or FAN header. Your board appears to be quite old, lacking RGB features.

T
TBNRFlameBoy
Junior Member
33
07-02-2021, 08:27 PM
#8
Mobo : Prime H610M-E, place it in the header despite the odd clips and guard on the fans and board.
T
TBNRFlameBoy
07-02-2021, 08:27 PM #8

Mobo : Prime H610M-E, place it in the header despite the odd clips and guard on the fans and board.

S
Star_Plex
Member
77
07-10-2021, 08:13 PM
#9
Ignore the clips you need to adjust pins for the header. Your board includes a single RGB header as per the specifications https://www.asus.com/fr/motherboards-com.../techspec/. At the "10" position
S
Star_Plex
07-10-2021, 08:13 PM #9

Ignore the clips you need to adjust pins for the header. Your board includes a single RGB header as per the specifications https://www.asus.com/fr/motherboards-com.../techspec/. At the "10" position

C
chris66072
Member
156
07-25-2021, 06:26 PM
#10
RGB setup issues on the fan. The clip mechanism is rubbing against the black guard on the header, which doesn’t work no matter the angle. I found an old discussion about this and a cool idea: connect both fans together and just use the power and RGB cables, bypassing the header. Thoughts? Also thanks for your help!
C
chris66072
07-25-2021, 06:26 PM #10

RGB setup issues on the fan. The clip mechanism is rubbing against the black guard on the header, which doesn’t work no matter the angle. I found an old discussion about this and a cool idea: connect both fans together and just use the power and RGB cables, bypassing the header. Thoughts? Also thanks for your help!

Pages (2): 1 2 Next