F5F Stay Refreshed Hardware Desktop Initial HDMI connection setup

Initial HDMI connection setup

Initial HDMI connection setup

D
DraGonX541
Member
189
03-25-2021, 12:00 PM
#1
Consider checking the connection settings and ensure the correct cable is used. Also, verify that the graphics card is properly seated in the motherboard. After updating drivers, try resetting the display settings or reinstalling the graphics driver. If the problem persists, a factory reset might help.
D
DraGonX541
03-25-2021, 12:00 PM #1

Consider checking the connection settings and ensure the correct cable is used. Also, verify that the graphics card is properly seated in the motherboard. After updating drivers, try resetting the display settings or reinstalling the graphics driver. If the problem persists, a factory reset might help.

K
KidzBeEz
Member
242
03-25-2021, 07:40 PM
#2
Open BIOS, verify your display is configured for PCIE as the standard setting.
K
KidzBeEz
03-25-2021, 07:40 PM #2

Open BIOS, verify your display is configured for PCIE as the standard setting.

E
eduardodd08
Posting Freak
852
03-26-2021, 04:59 AM
#3
Thank you for your feedback. The BIO confirms PEG is the default setting. The problem persists. I’m evaluating reseating the graphics card and updating the BIOS as potential solutions. Any other ideas?
E
eduardodd08
03-26-2021, 04:59 AM #3

Thank you for your feedback. The BIO confirms PEG is the default setting. The problem persists. I’m evaluating reseating the graphics card and updating the BIOS as potential solutions. Any other ideas?