Increasing memory performance

Pages (2): 1 2 Next

Lukapop04
Member

216

07-01-2016, 02:40 PM

Upgrading your RAM is straightforward. You currently have 16GB of 3000MHz CL16 from Corsair, and you're considering Corsair Vengeance LX 3600MHz. No special steps needed—just install the new module as usual.

Lukapop04

07-01-2016, 02:40 PM #1

alerabbit
Posting Freak

840

07-04-2016, 07:01 PM

You would need to re-enable XMP/XAMP/DOCP.

alerabbit

07-04-2016, 07:01 PM #2

You would need to re-enable XMP/XAMP/DOCP.

PandaPantz
Member

07-05-2016, 02:13 AM

Theoretically, you just need to set up and turn on XMP. In real life, the performance of your CPU/Mobo setup can vary, so you might need to lower the clock speed to 3200 CL16—this usually happens only with older Ryzen models and has been mostly resolved now.

PandaPantz

07-05-2016, 02:13 AM #3

Yellowsmanlol
Junior Member

07-05-2016, 05:57 AM

It depends on your needs. Old RAM can still work, but newer systems might benefit from updated components for better performance.

Yellowsmanlol

07-05-2016, 05:57 AM #4

It depends on your needs. Old RAM can still work, but newer systems might benefit from updated components for better performance.

frenero
Member

171

07-05-2016, 02:21 PM

Refusing the change.
Alternative options available.
Let me know your preference.

frenero

07-05-2016, 02:21 PM #5

Refusing the change.
Alternative options available.
Let me know your preference.

mqrcky
Junior Member

07-05-2016, 03:41 PM

You’d likely need to clear the CMOS or disable XMP settings before replacing the RAM, depending on your system’s requirements.

mqrcky

07-05-2016, 03:41 PM #6

You’d likely need to clear the CMOS or disable XMP settings before replacing the RAM, depending on your system’s requirements.

mike_channel
Member

130

07-12-2016, 07:44 AM

It should work out of the box, but if you hit a no-post issue just reset the CMOS and you can turn it back on.

mike_channel

07-12-2016, 07:44 AM #7

It should work out of the box, but if you hit a no-post issue just reset the CMOS and you can turn it back on.

GaZeVII
Member

141

07-22-2016, 11:35 PM

You should not leave the battery connected while the system is off. Instead, unplug it and wait a few minutes before trying again.

GaZeVII

07-22-2016, 11:35 PM #8

You should not leave the battery connected while the system is off. Instead, unplug it and wait a few minutes before trying again.

Dark_Yourip
Junior Member

08-10-2016, 09:47 PM

Dark_Yourip

08-10-2016, 09:47 PM #9

xxSuperSweetxx
Member

170

08-11-2016, 01:20 AM

#10

Sure thing! I'll give it a shot and see what happens. Looking forward to your update!

xxSuperSweetxx

08-11-2016, 01:20 AM #10

Sure thing! I'll give it a shot and see what happens. Looking forward to your update!

Pages (2): 1 2 Next