F5F Stay Refreshed Power Users Overclocking !!!IMMEDIATE ASSIST REQUIRED!!! System Overclocking Issue

!!!IMMEDIATE ASSIST REQUIRED!!! System Overclocking Issue

!!!IMMEDIATE ASSIST REQUIRED!!! System Overclocking Issue

E
eramit
Junior Member
Find
12
06-13-2024, 09:18 AM
#1
Hi! I was seeking a bit more performance because my system is quite old, so I applied the alienware profiles they provided. The first try didn’t work—the clock readings still showed 3.4Ghz according to cpu-z. I saved the session and left, which prompted a message saying Windows couldn’t boot, likely due to recent hardware or software changes. The temperature isn’t an issue since it’s very cold where I live; CPU and GPU temps are around 25°C, and the fans run at high speeds for both GPU and main fans. I’ve tried safe mode, used the last known working configuration, disconnected power, and reset BIOS (it didn’t apply, so I selected it, confirmed, and pressed yes, but still no success). I checked the BIOS and saw the CPU was indeed at 3.4GHz. Any help would be greatly appreciated.
Reply
Reply
E
eramit
06-13-2024, 09:18 AM #1

Hi! I was seeking a bit more performance because my system is quite old, so I applied the alienware profiles they provided. The first try didn’t work—the clock readings still showed 3.4Ghz according to cpu-z. I saved the session and left, which prompted a message saying Windows couldn’t boot, likely due to recent hardware or software changes. The temperature isn’t an issue since it’s very cold where I live; CPU and GPU temps are around 25°C, and the fans run at high speeds for both GPU and main fans. I’ve tried safe mode, used the last known working configuration, disconnected power, and reset BIOS (it didn’t apply, so I selected it, confirmed, and pressed yes, but still no success). I checked the BIOS and saw the CPU was indeed at 3.4GHz. Any help would be greatly appreciated.

Reply
Reply
C
Coolcoral
Member
Find
162
06-13-2024, 09:18 AM
#2
Restart the BIOS (disconnect the power, remove the coin cell, wait a few minutes, reinsert the battery) and trust it won’t be a major mistake.
Typically, overclocking is something I’d avoid unless you fully grasp the dangers and know how to fix it.
Reply
Reply
C
Coolcoral
06-13-2024, 09:18 AM #2

Restart the BIOS (disconnect the power, remove the coin cell, wait a few minutes, reinsert the battery) and trust it won’t be a major mistake.
Typically, overclocking is something I’d avoid unless you fully grasp the dangers and know how to fix it.

Reply
Reply
Z
Zu_mino
Junior Member
Find
39
06-13-2024, 09:18 AM
#3
Keep in mind, the temperature of your CPU isn't always crucial. If it becomes unstable at a certain speed, the cooling method doesn't matter much.
You generally need to increase the voltage for better stability. Then enhance the cooling to manage the extra heat.
Go back to the original settings and check if it starts up.
Reply
Reply
Z
Zu_mino
06-13-2024, 09:18 AM #3

Keep in mind, the temperature of your CPU isn't always crucial. If it becomes unstable at a certain speed, the cooling method doesn't matter much.
You generally need to increase the voltage for better stability. Then enhance the cooling to manage the extra heat.
Go back to the original settings and check if it starts up.

Reply
Reply
Z
zknucklehead
Member
Find
64
06-13-2024, 09:18 AM
#4
Merge of messages
LittleBigRunner asked for urgent assistance regarding an overclocking failure on their 2011 Alienware Aurora R3 system. They tried using alienware's overclock profiles, saved settings, and checked the BIOS, but the system remained at 3.4 GHz. After restarting and adjusting nothing else, they encountered a 'Windows failed to start' error possibly due to recent changes. They attempted a BIOS reset option, Windows repair, safe mode, and disabling power, but no improvement was seen. They also considered reinstalling Windows as a potential solution.
Reply
Reply
Z
zknucklehead
06-13-2024, 09:18 AM #4

Merge of messages
LittleBigRunner asked for urgent assistance regarding an overclocking failure on their 2011 Alienware Aurora R3 system. They tried using alienware's overclock profiles, saved settings, and checked the BIOS, but the system remained at 3.4 GHz. After restarting and adjusting nothing else, they encountered a 'Windows failed to start' error possibly due to recent changes. They attempted a BIOS reset option, Windows repair, safe mode, and disabling power, but no improvement was seen. They also considered reinstalling Windows as a potential solution.

Reply
Reply