I'm struggling with a persistent system-wide micro stutter issue.
I'm struggling with a persistent system-wide micro stutter issue.
In short, I rebuilt the whole setup after a CPU return model (other parts passed stress tests elsewhere) and now experience this bothersome micro stutter across all video outputs. It happens every half second or so, causing issues with games, videos, cursor movement, etc. It doesn’t appear in the BIOS or during the Windows installer setup. I’ve tried updating/clean installing drivers and software, freshened up the chipset, GPU, network, BIOS, and even reinstalled all updates and control apps (including GeForce Experience, Armory Crate, etc.). The system specs are: motherboard ASUS Strix B450 F II, CPU AMD 5800X, GPU ASUS Strix 3070 (non-TI), RAM Trident Z Royal 4000MHz, cooler ASUS Strix LC II 240mm ARGB, power supply Kioxia KBG40ZNV1T02 (1TB, ~2GBPS), Intel Wi-Fi 6E M.2 card, SSD Kioxia KBG40ZNV1T02 (1TB, ~2GBPS), Wi-Fi 6E M.2 card, displays running at 1440p 165Hz and 1080p 144Hz, 4K 60Hz on HDMI, plus ASUS ROG Flare monitor and Logitech 502 Hero Cannon EOS REBEL T5 Roland Rubix 24. I’ve also disconnected several components for troubleshooting: ASUS Blu-ray drive (SATA), WD Baracuda 1TB HDD, WD Baracuda 2TB HDD, a PNY 1TB SATA SSD from Walmart, and GrandMA3 onPC node with lots of RGB. A few USB HDDs like Pioneer DDJ400 Blackmagic ATEM Mini Pro and other random AV gear were included. Any advice would be greatly appreciated, as I’m really struggling and this system is essential to me.
Bios DOCP is active at 4000 MHz with normal temperatures. CPU and GPU behave as expected under load. The problem continues after disabling DOCP and setting the CPU to 2666 MHz.
Luckily for you, I’d also think about flushing out all manufacturer software—especially the RGB stuff—and doing a clean install. Just install the drivers one by one and test them. If that doesn’t work, strip everything down to the bare essentials and see if it improves things.
The fix just worked and it really helped a seasoned AVL engineer feel overwhelmed. Thanks for the effort! Any thoughts on why the multi-monitor setup might be the issue? It’s the first time with all four screens, and you’ve made such a complicated problem easy. Appreciate the reminder to keep exploring unconventional fixes. Always test unusual ideas, no matter your experience level.
Edit: February 28, 2023 – Connorocker Gaming
4000mhz ram isn't too tough for the 5800x. You didn't hit it on your older model, but you thought it was due to the same issue that ruined the chip—now you're trying to boost it further!
Zen 3 4000MT/s presents significant challenges for stability. Achieving consistent performance usually requires either exceptional luck or advanced tuning. Running at 3600 offers the best balance by syncing with the Infinity Fabric clock. Exceeding 1800 (3600) often disrupts this synchronization, leading to a reduced multiplier and diminished performance. Many users attempt higher speeds, but this crosses into complex overclocking territory. If instability persists, consider applying the second XMP profile or manually adjusting the clock speed. After these steps, you may need to update your Windows for optimal results.