F5F Stay Refreshed Hardware Desktop I’m in a tough spot.

I’m in a tough spot.

I’m in a tough spot.

C
csige791
Posting Freak
Find
818
06-09-2023, 02:10 AM
#1
I tried to remove four screws on the motherboard for the CPU cooler. I made a mistake on the final screw, and now I’m unsure what to do. Perhaps I could use a tool to cut the plastic part instead.
Reply
Reply
C
csige791
06-09-2023, 02:10 AM #1

I tried to remove four screws on the motherboard for the CPU cooler. I made a mistake on the final screw, and now I’m unsure what to do. Perhaps I could use a tool to cut the plastic part instead.

Reply
Reply
M
Maail99
Member
Find
161
06-09-2023, 02:27 AM
#2
Take a rubber band from the tip of the screwdriver and press firmly. For better results, choose the correct size screwdriver next time.
Reply
Reply
M
Maail99
06-09-2023, 02:27 AM #2

Take a rubber band from the tip of the screwdriver and press firmly. For better results, choose the correct size screwdriver next time.

Reply
Reply
T
Tsaren80
Member
Find
53
06-11-2023, 02:29 AM
#3
You could place a rubber band around the right-sized screwdriver or use a hardened Torx, hex, or Allen bit to test for resistance. Once it works, carve a small notch on the top of the screw after removal to prepare for a flat-blade tool.
Reply
Reply
T
Tsaren80
06-11-2023, 02:29 AM #3

You could place a rubber band around the right-sized screwdriver or use a hardened Torx, hex, or Allen bit to test for resistance. Once it works, carve a small notch on the top of the screw after removal to prepare for a flat-blade tool.

Reply
Reply
E
EmmaRosie629
Senior Member
Find
459
06-13-2023, 03:39 AM
#4
Using the correct size screwdriver makes a big difference. Apply enough pressure without damaging the threads, keeping the angle between the MoBo and the screwdriver at 90 degrees. If a larger tool doesn't fit, you'll need to replace the screw. It's best to complete these steps once and correctly, particularly when no spare parts are included with the MoBo.
Reply
Reply
E
EmmaRosie629
06-13-2023, 03:39 AM #4

Using the correct size screwdriver makes a big difference. Apply enough pressure without damaging the threads, keeping the angle between the MoBo and the screwdriver at 90 degrees. If a larger tool doesn't fit, you'll need to replace the screw. It's best to complete these steps once and correctly, particularly when no spare parts are included with the MoBo.

Reply
Reply
L
Lord_Enrico
Junior Member
Find
2
07-03-2023, 05:47 PM
#5
Choose a screwdriver that fits the Torx shape, test its effectiveness by applying gentle pressure. If needed, pair it with a rubber band or cyanoacrylate glue for better grip. Remember this as a reminder to always use the right tools.
Reply
Reply
L
Lord_Enrico
07-03-2023, 05:47 PM #5

Choose a screwdriver that fits the Torx shape, test its effectiveness by applying gentle pressure. If needed, pair it with a rubber band or cyanoacrylate glue for better grip. Remember this as a reminder to always use the right tools.

Reply
Reply
1
111carys111
Posting Freak
Find
832
07-10-2023, 07:06 AM
#6
In case things don’t go as planned, you can try a screw extractor instead. If the previous options fail, that works too.
Reply
Reply
1
111carys111
07-10-2023, 07:06 AM #6

In case things don’t go as planned, you can try a screw extractor instead. If the previous options fail, that works too.

Reply
Reply
W
WaterLily2003
Senior Member
Find
648
07-12-2023, 08:01 AM
#7
Use a larger Philips screwdriver and apply moderate pressure, try to remove the final pieces from the head. If successful, the screw is out.
Reply
Reply
W
WaterLily2003
07-12-2023, 08:01 AM #7

Use a larger Philips screwdriver and apply moderate pressure, try to remove the final pieces from the head. If successful, the screw is out.

Reply
Reply