Identifying issues causing freezing in Windows due to vibration transfer
Identifying issues causing freezing in Windows due to vibration transfer
I have placed my Windows PC on my desk, which serves as both my workbench and a gaming station. I’ve observed that when I drop something—like my phone—it usually causes the entire system to freeze about 75% of the time. I often have to shut it down manually, losing all open work. When there’s no external vibration, the machine seems perfectly fine. My PC is around five years old, so I expected a few more years left. I’ve searched everywhere for possible causes but haven’t found any solutions. Could this issue be related to my two stacked 3.5" HDD drives? Have others experienced similar freezing problems? What steps have you taken to troubleshoot it?
I recommend trying to reposition the cables—unplugging them and then reconnecting them—to remove any buildup of corrosion in the connectors. Then check the smart readings on your HDD and review the Windows error logs. To verify if the issue lies with the hard drive, you can use a USB flash drive, install Linux on it, and boot from there. If the system runs smoothly, the problem is likely with the hard drive.
either: - the hard drives don’t hold up under the shaking, which feels really fragile if true. - there’s probably a loose wire somewhere that will snap out completely with a small impact. something absurd to test... does it still occur when you flip the computer upside down? if not, focus your efforts on heavier components.