Identify the adjustment you wish to make.
Identify the adjustment you wish to make.
To boost your network protection, MAC address filtering isn<|pad|> can be a minor hurdle. A robust WiFi password using top encryption (like WPA2-AES) should come first. Concealing your SSID is hardly effective since determined attackers can detect it. MAC addresses are also vulnerable to spoofing, allowing unauthorized entry. In practice, this method can become frustrating when you need access. For instance, if you add five devices to your whitelist—say two TVs, one phone, one laptop, and one tablet—only those five can connect. The router’s admin panel is the only way to modify settings. If you can’t reach your phone, laptop, or tablet for configuration, you’ll struggle to get through the TVs. As devices keep changing, this approach will soon become impractical.
Well... that's good news. I usually believed MAC filtering was essential. Based on the security encryption, I'm confident it's set to 'WPA2-AES'. My password was created by LastPass, which makes it strong as well. I've attached a screenshot. Check for any additional adjustments you might need to secure your network further.
It could simplify the setup by permitting outbound traffic while limiting inbound access from the router’s viewpoint. Including your LAN interface and adding all MAC addresses as sources to the same destination would create extra complexity. The PSK you received seems reasonable, but turn off WPS to avoid potential security risks. Your device appears outdated; consider replacing it with a newer model to mitigate issues like kr00k, which currently has no known patches.
Consider exploring third-party firmware options for your router. DD-WRT and OpenWRT typically offer compatibility. Proceed with caution, though—incorrect flashing may permanently damage your device. Always verify the documentation and confirm your router’s specific model and revision are supported. Although many new features become available, some routers lack sufficient flash memory, RAM, or processing power to run third-party firmware reliably. If your setup appears functional and stable, continue using the original firmware and follow manufacturer instructions for updates.
I don’t have the funds for a new router, but I appreciate the advice.
That's a pretty cautious approach. I'm going to go with the stock firmware as you recommended.