I9 10850k + z490 prime a @1.7v default settings please assist

169

08-10-2020, 06:34 AM

Uncertain about the reason, but I removed the power limits and now the motherboard won’t lower the voltage even after resetting to defaults.

Beastboomer1

08-10-2020, 06:34 AM #1

Uncertain about the reason, but I removed the power limits and now the motherboard won’t lower the voltage even after resetting to defaults.

10riley17
Member

185

08-18-2020, 05:41 AM

Yes, I've checked if that's something you've done.

10riley17

08-18-2020, 05:41 AM #2

Yes, I've checked if that's something you've done.

BananaManYT
Member

08-25-2020, 08:05 PM

Considered it but I think I’d prefer to eliminate the pl while keeping the core voltage stable, something lasting that’s easy to use every day.

BananaManYT

08-25-2020, 08:05 PM #3

Considered it but I think I’d prefer to eliminate the pl while keeping the core voltage stable, something lasting that’s easy to use every day.

noahXboy
Junior Member

09-01-2020, 04:10 PM

Perform the CMOS reset, then confirm you have the most recent BIOS installed. It’s possible you’re using an outdated version that’s causing issues.

noahXboy

09-01-2020, 04:10 PM #4

Perform the CMOS reset, then confirm you have the most recent BIOS installed. It’s possible you’re using an outdated version that’s causing issues.

creeperman7899
Junior Member

09-07-2020, 01:24 PM

I'm confirming it, the newest update was verified right after I received the board from AliExpress.

creeperman7899

09-07-2020, 01:24 PM #5

I'm confirming it, the newest update was verified right after I received the board from AliExpress.

horselover328
Member

148

09-10-2020, 01:14 AM

Do you know anything about the platform? I've worked on the xeon x-58 - x99 team for some time.

horselover328

09-10-2020, 01:14 AM #6

Do you know anything about the platform? I've worked on the xeon x-58 - x99 team for some time.

MicrowavedCat
Member

09-10-2020, 07:33 AM

It worked perfectly and I could clear the restrictions right away by pressing f3 on the first boot, though my power usage seems unusual on the OCT.

MicrowavedCat

09-10-2020, 07:33 AM #7

It worked perfectly and I could clear the restrictions right away by pressing f3 on the first boot, though my power usage seems unusual on the OCT.

ZexyZeke
Member

166

09-11-2020, 08:28 AM

The topic closes automatically when you reach the end, unless you explicitly close it.

ZexyZeke

09-11-2020, 08:28 AM #8

The topic closes automatically when you reach the end, unless you explicitly close it.

WinterPR
Member

129

09-22-2020, 07:36 PM

I'm new to OCCT and don't understand typical power usage. Good to hear the CMOS clearing succeeded. You're welcome to stop the discussion, but you can label my note as a solution. Your choice.

WinterPR

09-22-2020, 07:36 PM #9

I'm new to OCCT and don't understand typical power usage. Good to hear the CMOS clearing succeeded. You're welcome to stop the discussion, but you can label my note as a solution. Your choice.