F5F Stay Refreshed Hardware Desktop i7-9700K running at 4.6GHz during idle mode

i7-9700K running at 4.6GHz during idle mode

i7-9700K running at 4.6GHz during idle mode

Pages (2): 1 2 Next
J
JeronimoYT
Senior Member
428
12-06-2018, 01:58 AM
#1
It's unusual to experience this twice, but it's not uncommon. No need to worry—let me know if you want some suggestions!
J
JeronimoYT
12-06-2018, 01:58 AM #1

It's unusual to experience this twice, but it's not uncommon. No need to worry—let me know if you want some suggestions!

N
Noah_Elias
Junior Member
31
12-07-2018, 08:28 AM
#2
I confirm the issue stemmed from idling through the bluescreen viewer. The BSOD occurred during a stopped state, and I reviewed the details to identify the cause.
N
Noah_Elias
12-07-2018, 08:28 AM #2

I confirm the issue stemmed from idling through the bluescreen viewer. The BSOD occurred during a stopped state, and I reviewed the details to identify the cause.

R
ReborntoKill
Posting Freak
821
12-16-2018, 12:19 AM
#3
This setting keeps your processor running at its maximum speed across all cores, which can be useful for demanding tasks. It should remain stable as long as your BIOS defaults are correct.
R
ReborntoKill
12-16-2018, 12:19 AM #3

This setting keeps your processor running at its maximum speed across all cores, which can be useful for demanding tasks. It should remain stable as long as your BIOS defaults are correct.

B
Bewerewolf12
Member
157
12-16-2018, 01:59 AM
#4
Disable multicore optimization
B
Bewerewolf12
12-16-2018, 01:59 AM #4

Disable multicore optimization

B
benlec
Junior Member
3
12-16-2018, 04:28 AM
#5
The first problem was CLOCK_WATCHDOG_TIMEOUT, the second was MACHINE_HANDLE_EXCEPTION, and a third issue appeared with another setting. I also face other challenges such as normal RAM speeds allowing the system to operate smoothly, but adjusting XMP profiles from Asus Maximus in the BIOS causes sudden on/off cycles lasting about two seconds, followed by unexpected restarts that lead to BSODs and occasional "No signal from dp port" messages on the monitor even when the PC is still active. I’m new to this setup and built my PC just four days ago; initially it only showed a two-time boot error at startup, but after playing graphically demanding games like BF5, temperatures rose sharply to 85°C, triggering these instability issues. I live in a small city with limited access to tech experts, especially those experienced with gaming PCs. At this stage, I’m willing to hire someone who can assist with video calls and systematically resolve all my problems one by one.
B
benlec
12-16-2018, 04:28 AM #5

The first problem was CLOCK_WATCHDOG_TIMEOUT, the second was MACHINE_HANDLE_EXCEPTION, and a third issue appeared with another setting. I also face other challenges such as normal RAM speeds allowing the system to operate smoothly, but adjusting XMP profiles from Asus Maximus in the BIOS causes sudden on/off cycles lasting about two seconds, followed by unexpected restarts that lead to BSODs and occasional "No signal from dp port" messages on the monitor even when the PC is still active. I’m new to this setup and built my PC just four days ago; initially it only showed a two-time boot error at startup, but after playing graphically demanding games like BF5, temperatures rose sharply to 85°C, triggering these instability issues. I live in a small city with limited access to tech experts, especially those experienced with gaming PCs. At this stage, I’m willing to hire someone who can assist with video calls and systematically resolve all my problems one by one.

M
matt455
Member
188
12-16-2018, 04:36 AM
#6
The PC was set to the default "Balanced" configuration, and I verified that as well. I upgraded the BIOS to the most recent release about a day prior.
M
matt455
12-16-2018, 04:36 AM #6

The PC was set to the default "Balanced" configuration, and I verified that as well. I upgraded the BIOS to the most recent release about a day prior.

B
bbbdar
Junior Member
19
12-17-2018, 06:15 AM
#7
It began as "Disabled" but I switched to "Auto-Let bios optimize" and it remained identical in both configurations.
B
bbbdar
12-17-2018, 06:15 AM #7

It began as "Disabled" but I switched to "Auto-Let bios optimize" and it remained identical in both configurations.

P
PackMan69
Member
70
12-17-2018, 07:10 AM
#8
P
PackMan69
12-17-2018, 07:10 AM #8

X
Xytrixz
Senior Member
552
12-18-2018, 10:46 AM
#9
Restore the BIOS to its original configuration.
X
Xytrixz
12-18-2018, 10:46 AM #9

Restore the BIOS to its original configuration.

L
louie018
Posting Freak
824
12-18-2018, 02:41 PM
#10
The default settings are automatically optimized—it's an Asus board. Select disable to enable Intel standard.
L
louie018
12-18-2018, 02:41 PM #10

The default settings are automatically optimized—it's an Asus board. Select disable to enable Intel standard.

Pages (2): 1 2 Next