F5F Stay Refreshed Hardware Desktop I7 8700 experiencing overheating issues requires assistance.

I7 8700 experiencing overheating issues requires assistance.

I7 8700 experiencing overheating issues requires assistance.

W
wesselboy11
Member
221
11-08-2017, 09:12 PM
#1
Hello, thank you for your message. I'm still trying to figure this out and have tested various solutions to fix the overheating issues in certain games. While my system generally handles high settings well—often staying under 65°C even at boost—I sometimes see spikes reaching 75-85°C in games like State of Decay 2 and Slime Rancher, which can cause restarts. I've upgraded a bit recently to try reducing these peaks. I've applied thermal paste, updated drivers and BIOS, improved airflow by removing the front case shroud, and even replaced the cooler. The stock unit isn't performing well at high temps, so I was hoping for some help from others who might have similar experiences. This problem began before any changes, and I bought the parts from Cyberpower PC in April. I'm sharing my setup details below. Let me know if you've faced the same challenges with an i7 8700.
W
wesselboy11
11-08-2017, 09:12 PM #1

Hello, thank you for your message. I'm still trying to figure this out and have tested various solutions to fix the overheating issues in certain games. While my system generally handles high settings well—often staying under 65°C even at boost—I sometimes see spikes reaching 75-85°C in games like State of Decay 2 and Slime Rancher, which can cause restarts. I've upgraded a bit recently to try reducing these peaks. I've applied thermal paste, updated drivers and BIOS, improved airflow by removing the front case shroud, and even replaced the cooler. The stock unit isn't performing well at high temps, so I was hoping for some help from others who might have similar experiences. This problem began before any changes, and I bought the parts from Cyberpower PC in April. I'm sharing my setup details below. Let me know if you've faced the same challenges with an i7 8700.

G
Gregdon55
Junior Member
41
11-09-2017, 12:25 AM
#2
The issue lies with the board; its VRM isn't strong enough. This highlights why pairing top-tier CPUs with mediocre boards isn't cost-effective. The PSU you're using is Masterbox lite 3.1, which doesn't provide sufficient airflow.
G
Gregdon55
11-09-2017, 12:25 AM #2

The issue lies with the board; its VRM isn't strong enough. This highlights why pairing top-tier CPUs with mediocre boards isn't cost-effective. The PSU you're using is Masterbox lite 3.1, which doesn't provide sufficient airflow.

I
Ihunter32
Junior Member
3
11-14-2017, 08:30 AM
#3
I'm not confident about the PSU other than it handling 500W. That case looks bad, I really dislike it, but removing the front lowered temperatures by at least 10°C.
I
Ihunter32
11-14-2017, 08:30 AM #3

I'm not confident about the PSU other than it handling 500W. That case looks bad, I really dislike it, but removing the front lowered temperatures by at least 10°C.

S
Saricck
Member
103
11-14-2017, 04:20 PM
#4
That’s what caused the issue.
S
Saricck
11-14-2017, 04:20 PM #4

That’s what caused the issue.

K
KriDel
Junior Member
2
11-15-2017, 09:24 AM
#5
It was fully powder-coated, featuring just inspection labels. There were no original manufacturer markings present.
K
KriDel
11-15-2017, 09:24 AM #5

It was fully powder-coated, featuring just inspection labels. There were no original manufacturer markings present.

L
livtheviking
Posting Freak
846
11-15-2017, 03:06 PM
#6
so it's a death trap
L
livtheviking
11-15-2017, 03:06 PM #6

so it's a death trap

C
211
11-15-2017, 04:54 PM
#7
It's not unexpected at all. The construction seems reasonable.
C
coolbencool890
11-15-2017, 04:54 PM #7

It's not unexpected at all. The construction seems reasonable.