F5F Stay Refreshed Hardware Desktop I7 8086K OC configuration

I7 8086K OC configuration

I7 8086K OC configuration

M
MacSolaris
Senior Member
457
06-25-2022, 11:05 AM
#1
Hello! Your setup sounds solid—running an I7-8086K at 5 GHz with Arctic Cooling Liquid Freezer 120. The Cinebench R20 test ran smoothly for 15 minutes without any crashes. You’re likely on the right path. Keep monitoring performance as you adjust settings.
M
MacSolaris
06-25-2022, 11:05 AM #1

Hello! Your setup sounds solid—running an I7-8086K at 5 GHz with Arctic Cooling Liquid Freezer 120. The Cinebench R20 test ran smoothly for 15 minutes without any crashes. You’re likely on the right path. Keep monitoring performance as you adjust settings.

R
Rubicube59
Member
192
06-29-2022, 04:10 AM
#2
The image was captured during a Cinebench run. The CPU utilization appears high, suggesting the Vcore setting might be too low. Check the selected LLC level for accuracy.
R
Rubicube59
06-29-2022, 04:10 AM #2

The image was captured during a Cinebench run. The CPU utilization appears high, suggesting the Vcore setting might be too low. Check the selected LLC level for accuracy.

B
brucewoo
Member
59
07-08-2022, 05:54 PM
#3
It was confirmed! I'm not sure why it didn't reach full capacity.
B
brucewoo
07-08-2022, 05:54 PM #3

It was confirmed! I'm not sure why it didn't reach full capacity.

A
AntonioGaymer
Member
229
07-08-2022, 11:18 PM
#4
Indicates your overclock is probably not stable. Cinebench serves more as a benchmark than a stability check; use Prime95 or Linpack Xtreme instead to verify actual stability.
A
AntonioGaymer
07-08-2022, 11:18 PM #4

Indicates your overclock is probably not stable. Cinebench serves more as a benchmark than a stability check; use Prime95 or Linpack Xtreme instead to verify actual stability.

M
MineFloYT
Member
190
07-29-2022, 12:55 PM
#5
Screenshot taken with version 95
M
MineFloYT
07-29-2022, 12:55 PM #5

Screenshot taken with version 95

P
pocio77
Posting Freak
783
07-31-2022, 12:46 PM
#6
Ensure your CPU remains at full capacity. Adjust the multiplier to 49 and observe changes. Verify your BIOS is up to date.
P
pocio77
07-31-2022, 12:46 PM #6

Ensure your CPU remains at full capacity. Adjust the multiplier to 49 and observe changes. Verify your BIOS is up to date.

I
Ipod984
Senior Member
707
07-31-2022, 05:10 PM
#7
I'll attempt it, though I might encounter a BSOD. I'm not an expert, but I'm ready to give it a shot.
I
Ipod984
07-31-2022, 05:10 PM #7

I'll attempt it, though I might encounter a BSOD. I'm not an expert, but I'm ready to give it a shot.

M
manooon1128
Member
130
07-31-2022, 06:18 PM
#8
It's better to proceed gradually when boosting performance, especially for overclocking. For a detailed and helpful walkthrough, check out this video: https://www.youtube.com/watch?v=FJ-1WSvN4aQ. While Comet Lake is featured here, the same principles apply on Coffee Lake.
M
manooon1128
07-31-2022, 06:18 PM #8

It's better to proceed gradually when boosting performance, especially for overclocking. For a detailed and helpful walkthrough, check out this video: https://www.youtube.com/watch?v=FJ-1WSvN4aQ. While Comet Lake is featured here, the same principles apply on Coffee Lake.

J
JunkdudeHD
Junior Member
47
08-10-2022, 09:51 AM
#9
Thanks! Let's keep it going.
J
JunkdudeHD
08-10-2022, 09:51 AM #9

Thanks! Let's keep it going.