i7 3770 non k OC
i7 3770 non k OC
It seems you didn't look up the forum or search online. The multiplier can increase. At 400mhz it's divided into 4 bins, which is 4+ on the multiplier. Doing this with bclk for all the different SKUs running various multis would be complicated. Plus, bclk can be adjusted to higher values. I usually just mention 400mhz since changing bclk and using 4 bins might confuse people.
I read somewhere that it caps at 4.1ghz in all cores under full load though is that true?
There is a turbo loophole that allows it to run 4.3ghz on all cores. This just isn't on all mobos so it may only go to 4.1ghz on all cores but still 4.3ghz on 1 core. In case you didn't know, you are pretty much just changing turbo speeds.
Yeah, I understand. From what I read, only Gigabyte and ASUS offer a multicore enhancement that allows all cores to run at 4.3GHz. I don't believe AsRock has this feature.
Msi referred to it as enhanced turbo, Asrock called it multicore acceleration or enhanced turbo. Various manufacturers offered it. It isn't a distinct setting in most devices and might be included in the auto OC function. Review the load optimized options.
The system referred to it as enhanced turbo, while Asrock mentioned multicore acceleration or enhanced turbo. Most manufacturers included this feature, and it might be part of the auto oc setting. Review the load optimized options. Your preference on whether to keep voltage at Auto or adjust manually is up to you.
Did you locate it on your motherboard? I thought they probably included it using z77.
Did you locate it on your motherboard? I was certain they included it using Z77. Auto tends to overvolt. I'm not sure because I haven't received the motherboard yet, but I saw a video about the AsRock z77 pro4 and had the load settings optimized in the BIOS, so I think it's similar on the micro ATX version too.
Did you check your motherboard? I thought they added it in z77. It tends to overvolt. Hello. The board I received is arriving tomorrow, and I wanted to ask about the non-K OC settings. Should I use load optimized to reach 4.3ghz, and if not, what voltage should I start at?