F5F Stay Refreshed Power Users Overclocking i5 7600k overheTING

i5 7600k overheTING

i5 7600k overheTING

Pages (2): 1 2 Next
R
RetroNoob
Member
62
08-23-2017, 08:13 AM
#1
I’m facing an issue where my CPU is overheating. My new PC hasn’t started the OS yet, and the BIOS is showing a CPU fan error. I’ve installed ThermalTAKE 3 Performer but don’t know how to check if the pumps are working properly. Please help me.
R
RetroNoob
08-23-2017, 08:13 AM #1

I’m facing an issue where my CPU is overheating. My new PC hasn’t started the OS yet, and the BIOS is showing a CPU fan error. I’ve installed ThermalTAKE 3 Performer but don’t know how to check if the pumps are working properly. Please help me.

K
kgavaga
Member
112
08-25-2017, 07:44 AM
#2
Hi there, we're trying to help you, but it would be appriciated if you could not use all caps and also try just a bit harder to spell.
Is the main fan plugged into the motherboard's CPU fan plug? If there's not a fan plugged into the 3/4 pin on the motherboard it will often give this error.
Where are the fans plugged in, and where is the pump plugged in?
K
kgavaga
08-25-2017, 07:44 AM #2

Hi there, we're trying to help you, but it would be appriciated if you could not use all caps and also try just a bit harder to spell.
Is the main fan plugged into the motherboard's CPU fan plug? If there's not a fan plugged into the 3/4 pin on the motherboard it will often give this error.
Where are the fans plugged in, and where is the pump plugged in?

C
CryseArtz
Junior Member
45
08-25-2017, 10:26 AM
#3
Was die Wärmeleitpaste erneut auf den CPU aufgetragen, bevor Sie den CPU-Lüfter installieren?
C
CryseArtz
08-25-2017, 10:26 AM #3

Was die Wärmeleitpaste erneut auf den CPU aufgetragen, bevor Sie den CPU-Lüfter installieren?

M
Madthunder2t3
Member
195
08-26-2017, 12:59 PM
#4
THE REQUIRED INFORMATION IS PROVIDED IN THE PREVIOUS MESSAGE. PLEASE REINSERT IT SO I CAN ASSIST YOU.
M
Madthunder2t3
08-26-2017, 12:59 PM #4

THE REQUIRED INFORMATION IS PROVIDED IN THE PREVIOUS MESSAGE. PLEASE REINSERT IT SO I CAN ASSIST YOU.

I
ISY_0815
Senior Member
566
08-26-2017, 02:51 PM
#5
How to determine if a pump is functioning or not
I
ISY_0815
08-26-2017, 02:51 PM #5

How to determine if a pump is functioning or not

C
Chiller9592
Senior Member
670
08-26-2017, 10:25 PM
#6
Hi there, we're trying to help you, but it would be appriciated if you could not use all caps and also try just a bit harder to spell.
Is the main fan plugged into the motherboard's CPU fan plug? If there's not a fan plugged into the 3/4 pin on the motherboard it will often give this error.
Where are the fans plugged in, and where is the pump plugged in?
C
Chiller9592
08-26-2017, 10:25 PM #6

Hi there, we're trying to help you, but it would be appriciated if you could not use all caps and also try just a bit harder to spell.
Is the main fan plugged into the motherboard's CPU fan plug? If there's not a fan plugged into the 3/4 pin on the motherboard it will often give this error.
Where are the fans plugged in, and where is the pump plugged in?

D
damo_chelsea
Junior Member
38
08-26-2017, 11:18 PM
#7
the pump is connected with a 3-pin plug while the fan is using a 4-pin connection. there are two fans, one equipped with the cooler and another located on the front panel. the 4-pin fans are connected to the CPU fan 1 and CPU fan 2 respectively.
D
damo_chelsea
08-26-2017, 11:18 PM #7

the pump is connected with a 3-pin plug while the fan is using a 4-pin connection. there are two fans, one equipped with the cooler and another located on the front panel. the 4-pin fans are connected to the CPU fan 1 and CPU fan 2 respectively.

P
PersieO
Posting Freak
786
09-06-2017, 05:17 AM
#8
Disconnect the front case fan, check if it starts with only the 4-pin CPU fan in CPU FAN 1, and the pump in one of the 3 pins.
P
PersieO
09-06-2017, 05:17 AM #8

Disconnect the front case fan, check if it starts with only the 4-pin CPU fan in CPU FAN 1, and the pump in one of the 3 pins.

P
Pickmaster12
Senior Member
710
09-06-2017, 09:15 AM
#9
Sure, I'll definitely give it a shot once I get here, thank you ahead of time!
P
Pickmaster12
09-06-2017, 09:15 AM #9

Sure, I'll definitely give it a shot once I get here, thank you ahead of time!

S
Sentio_Cege
Member
246
09-08-2017, 12:27 AM
#10
this board lacks a 3-pin connector for the pump
S
Sentio_Cege
09-08-2017, 12:27 AM #10

this board lacks a 3-pin connector for the pump

Pages (2): 1 2 Next