F5F Stay Refreshed Power Users Overclocking i5 6600k running hot?

i5 6600k running hot?

i5 6600k running hot?

Z
Zyu_UY
Member
100
03-06-2016, 04:36 PM
#1
I have an i5 6600k, ASUS Z170-A motherboard, and a Cryorig H7 cooler. After testing with Prime95 and monitoring temperatures using RealTemp, I notice the temps have dropped to around 80°C. Using Speccy, I see temperatures in the low 70s. I'm overclocked to 4.5GHz with core voltages at 1.280. It feels a bit too hot. Could you offer advice on possible issues or whether these readings are normal?
Z
Zyu_UY
03-06-2016, 04:36 PM #1

I have an i5 6600k, ASUS Z170-A motherboard, and a Cryorig H7 cooler. After testing with Prime95 and monitoring temperatures using RealTemp, I notice the temps have dropped to around 80°C. Using Speccy, I see temperatures in the low 70s. I'm overclocked to 4.5GHz with core voltages at 1.280. It feels a bit too hot. Could you offer advice on possible issues or whether these readings are normal?

D
DemoDaBoss_GL
Member
170
03-11-2016, 12:14 PM
#2
I would compare your overclocked load temperatures with your original ones. Keep in mind that overclocking alters your CPU's TDP, causing it to heat up more during higher loads because of higher voltage per cycle. The only options are either seek a more stable lower voltage or reduce both clock speed and voltage.
D
DemoDaBoss_GL
03-11-2016, 12:14 PM #2

I would compare your overclocked load temperatures with your original ones. Keep in mind that overclocking alters your CPU's TDP, causing it to heat up more during higher loads because of higher voltage per cycle. The only options are either seek a more stable lower voltage or reduce both clock speed and voltage.

B
220
03-13-2016, 03:25 AM
#3
Based on what I've seen in some discussions, Prime95 tends to put a lot of strain on the CPU, with some users reaching temperatures as high as 95 degrees. I think that's typical, though a 70-degree reading seems reasonable. What about your own idle temperatures?
B
BlueSkyHorizon
03-13-2016, 03:25 AM #3

Based on what I've seen in some discussions, Prime95 tends to put a lot of strain on the CPU, with some users reaching temperatures as high as 95 degrees. I think that's typical, though a 70-degree reading seems reasonable. What about your own idle temperatures?

E
Ender_Craft47
Posting Freak
866
03-13-2016, 12:48 PM
#4
In either program, 36-40 at idle, stock was approximately 27-30.
E
Ender_Craft47
03-13-2016, 12:48 PM #4

In either program, 36-40 at idle, stock was approximately 27-30.

X
xDerpz
Junior Member
5
03-19-2016, 05:15 AM
#5
Chevyfan454 shared that according to either program 36-40 at idle, stock performance was around 27-30 at idle. They mentioned not being very familiar with overclocking but noted it raises temperatures, which they considered normal. They advised keeping it under 70 degrees for gaming unless the CPU is under stress.
X
xDerpz
03-19-2016, 05:15 AM #5

Chevyfan454 shared that according to either program 36-40 at idle, stock performance was around 27-30 at idle. They mentioned not being very familiar with overclocking but noted it raises temperatures, which they considered normal. They advised keeping it under 70 degrees for gaming unless the CPU is under stress.

R
Rosario17_
Posting Freak
897
03-21-2016, 04:06 AM
#6
Alright, thank you. Anyone else that would like to chime in and give their opinion as well?
R
Rosario17_
03-21-2016, 04:06 AM #6

Alright, thank you. Anyone else that would like to chime in and give their opinion as well?

H
hahahalo21
Junior Member
46
03-21-2016, 10:26 AM
#7
Chevyfan454 is ready, please share your thoughts too!
H
hahahalo21
03-21-2016, 10:26 AM #7

Chevyfan454 is ready, please share your thoughts too!

M
MCmaniacs13
Member
76
03-22-2016, 09:17 AM
#8
I would compare your overclocked load temperatures with your original ones. Keep in mind that overclocking alters your CPU's TDP, causing it to heat up more during higher loads because of higher voltage per cycle. The only options are either seek a steadier lower voltage for the new speeds or reduce both clock speed and voltage.
M
MCmaniacs13
03-22-2016, 09:17 AM #8

I would compare your overclocked load temperatures with your original ones. Keep in mind that overclocking alters your CPU's TDP, causing it to heat up more during higher loads because of higher voltage per cycle. The only options are either seek a steadier lower voltage for the new speeds or reduce both clock speed and voltage.

T
TermsOfYOLO
Member
58
03-22-2016, 03:13 PM
#9
You might also try adjusting the quantity of thermal compound, as using too little or too much can lead to additional heat. Just a small amount, about the size of a grain of rice, should suffice.
T
TermsOfYOLO
03-22-2016, 03:13 PM #9

You might also try adjusting the quantity of thermal compound, as using too little or too much can lead to additional heat. Just a small amount, about the size of a grain of rice, should suffice.