i4670k overcklock issue
i4670k overcklock issue
Hi all!
I've been using my i4670k for about 3.5 years now. Since then, I've kept it locked at 4.4 ghz with a voltage of around 1.270V. At first, temperatures were normal—30c to 38c on idle, and 70c to 80c under load and stress. Recently, things have gotten worse. On idle it's about 60c, and under load it's climbing to 100c and above!
I've tried applying Intel's original thermal paste with CollerMaster Mastergel Maker, but it didn't help much. The temperatures are still too high.
Now I have two choices: either remove the CPU to cool it down, or I can upgrade to a new one and overclock it. However, I'm worried the CPU might be damaged from the heat.
Could you please advise me on what to do next? Or suggest other solutions?
Thanks!
Amit
amitkl2009 :
Ok so a little update.
I finally delidded my 4670k. Unfortunately, it doesn't seem like helping at all. Temperatures are still the same. I'm clueless now...
Any segestions?
🙁
You sure that your Cooler is working its AIO?
is the pump working? test the Temp with stock intel cooler and see if its same or worse
Amitkl2009:
Hi everyone!
My i4670k has been running for about 3.5 years now. Since then it's been locked down to 4.4 ghz at around 1.270V. At first, temperatures were normal – idle was between 30c-38c, and under load and stress they reached 70c-80c. Recently, things have gotten worse. Idle temps are about 60c and under load it's hitting 100c and higher!
I've tried applying Intel's original thermal paste with CollerMaster Mastergel Maker, but it didn't help much. The temperatures remain high.
Now I have two choices: either remove the CPU to cool it down, or I can upgrade and overclock it.
However, I'm worried the CPU might be damaged from the heat.
Could you please advise me on what to do now? Or suggest other solutions?
Thanks!
The 4670k is a solid CPU, no major upgrade needed. The processor isn’t worn out at all. There might be a minor issue, but it’s not a big concern. You should consider replacing the cooler. Any Noctua model works well, like the Hyper 212 Evo or other Phanteks options—these are all effective air coolers.
I’ve been looking online and the consensus is that delid is the top choice. A fresh cooler will definitely help, though it won’t be a game changer.
Amitkl2009 shares insights on the 4670k processor, noting it's a solid CPU with no urgent need for upgrading. The chip isn't showing significant wear, though minor damage might exist. A replacement cooler is advisable, preferably a Noctua model or any Phanteks option. Other recommendations include the Hyper 212 Evo and similar air coolers. He mentions his current setup is an Antec Kuhler H2O 650 Liquid Cooling System. His previous cooler was subpar, so he switched to a Noctua Nh-D15 air cooler. He prefers the vice method and runs an i5-4690k with custom water cooling at 4.8GHz, achieving a max temperature of 50°C on the hottest core. He believes a better cooler would make a noticeable difference, though delidding isn't essential. A new cooler can significantly improve performance, especially if budget allows. Otherwise, any decent air cooler will suffice.
Your present cooler ranks among the lowest in the budget range for AIO systems. I met someone who used one and found it extremely poor. We swapped it with a Noctua Nh-D15 air cooler. If you don’t need a high-quality cooler, delidding is still beneficial, though it’s not essential. Personally, I prefer the vice method. I’m running an i5-4690k with custom water cooling and have removed the case for 4.8GHz, reaching a maximum temperature of 50°C on the hottest core. A decent cooler will make a significant difference, and delidding adds extra performance if you’re after it. However, a poor cooler won’t compensate for one that’s terrible. A fresh cooler can truly change the game. If you can afford it, choose a quality AIO or custom loop; otherwise, any good air cooler should suffice.
Your present cooler is among the least effective for AIO models. I was familiar with someone who had one, and it performed poorly. We swapped it in with a Noctua Nh-D15 air cooler. If you don’t need a high-quality cooler, delidding isn’t essential—but it does help. Personally, I prefer the vice method. I’m running an i5-4690k with custom water cooling and have removed the case, achieving a max temperature of 50°C on the hottest core. A decent cooler will make a big difference, and delidding is definitely worth the effort if you want extra performance. If you can afford it, opt for a quality AIO or a custom loop. Otherwise, any good air cooler should suffice.
Thanks!
I plan to begin with delidding my 4670k since I’ve already ordered a Coolaboratory Liquid Pro, which is far more affordable than purchasing a new cooling system. If that doesn’t work, I’ll attempt a new cooler, and if it fails, then my CPU is likely in bad shape.
The Corsair H100 series is expensive but can noticeably lower temperatures. If you’re considering building your own loop now, they’re a solid choice. For those interested in a custom setup, that’s the better path. To remove the case, I suggest using a vice or similar tools available online. Many delidding guides are available—remember to carefully scrape off Intel’s black glue from the CPU and IHS with a credit card or similar. It’s okay to press firmly with the card, but be cautious not to damage nearby capacitors. Also, watching videos of someone doing a delid or applying liquid metal can be very helpful.
amitkl2009 :
Ok so a little update.
I finally delidded my 4670k. Unfortunately, it doesn't seem like helping at all. Temperatures are still the same. I'm clueless now...
Any segestions?
🙁
You sure that your Cooler is working its AIO?
is the pump working? test the Temp with stock intel cooler and see if its same or worse