F5F Stay Refreshed Hardware Desktop i3-10100F equipped with 32GB memory and 3200MHz processor speed

i3-10100F equipped with 32GB memory and 3200MHz processor speed

i3-10100F equipped with 32GB memory and 3200MHz processor speed

D
DingbatPlayzMC
Senior Member
425
06-28-2018, 01:19 PM
#1
Hello, your new 32GB RAM with a 3200MHz clock speed should perform well. Your previous build had 16GB at 2444MHz, so upgrading to 32GB at the same speed is a solid move. The H510 from Gigabyte should handle it efficiently.
D
DingbatPlayzMC
06-28-2018, 01:19 PM #1

Hello, your new 32GB RAM with a 3200MHz clock speed should perform well. Your previous build had 16GB at 2444MHz, so upgrading to 32GB at the same speed is a solid move. The H510 from Gigabyte should handle it efficiently.

Z
ZeroXbot
Member
225
06-28-2018, 02:35 PM
#2
The processor supports up to 4.30 GHz with a 6M cache. RAM speed is limited by the maximum allowed.
Z
ZeroXbot
06-28-2018, 02:35 PM #2

The processor supports up to 4.30 GHz with a 6M cache. RAM speed is limited by the maximum allowed.

H
heyjudge100
Member
186
07-20-2018, 01:13 PM
#3
It will function but it will only operate at 2666 MHz instead of the desired 3200 MHz. To achieve higher RAM speeds, you'll need a B560 or Z4/590 processor. CometLake IMX is suited for around 4400-4600 MHz with approximately 1.45V VCC and VDS.
H
heyjudge100
07-20-2018, 01:13 PM #3

It will function but it will only operate at 2666 MHz instead of the desired 3200 MHz. To achieve higher RAM speeds, you'll need a B560 or Z4/590 processor. CometLake IMX is suited for around 4400-4600 MHz with approximately 1.45V VCC and VDS.

H
HDellrON
Senior Member
257
07-20-2018, 02:15 PM
#4
Ensure your setup is functioning properly unless you have a severely faulty controller.
H
HDellrON
07-20-2018, 02:15 PM #4

Ensure your setup is functioning properly unless you have a severely faulty controller.

C
commongrackle
Junior Member
13
07-29-2018, 11:42 PM
#5
In the 10th generation, performance is limited only by your own effort since there was no gear 2 available back then. I'm currently handling 4000mhz Cl36 stable RNC.
C
commongrackle
07-29-2018, 11:42 PM #5

In the 10th generation, performance is limited only by your own effort since there was no gear 2 available back then. I'm currently handling 4000mhz Cl36 stable RNC.