I ran into a strange issue with my computer.

S

Squampy
Junior Member

48

03-21-2016, 07:25 PM

#1

Today i attempted to turn on my pc and the monitor displayed no signal, though all components functioned properly. After some time, i decided to unplug the ram from its socket and reinsert it. The pc powered on and the monitor showed a signal. When i turned off the pc and tried to restart, the monitor again indicated no signal. I then removed the 6-pin connector from the GPU and reinserted it. This time, the pc started normally and the monitor displayed a signal. It’s been unusual for me to experience this before, so i’m seeking advice.

S

sokland54
Junior Member

8

03-23-2016, 07:41 PM

#2

Turn off the computer, shut off the power switch at the back of the PC, unplug the plug from the machine. Then press the power/start button for 10 seconds. Reconnect the power plug, restart the PSU, and attempt to start the computer. What occurs?

S

snapsong
Junior Member

8

03-25-2016, 06:18 AM

#3

Turn off the computer, shut off the power switch at the back of the PC, unplug the plug from the machine. Then press the power/start button for 10 seconds. Reconnect the power plug, restart the PSU, and attempt to start the computer. What occurs?

S

Sneakyginger8
Senior Member

580

04-08-2016, 02:46 PM

#4

It worked, ty so much !

S

Sveiv
Member

116

04-08-2016, 03:30 PM

#5

What a fascinating question! I'm quite impressed by the age of my computer. It's quite an old piece of technology!

R

ruralMCgaming
Member

153

04-10-2016, 12:11 PM

#6

Like 4-5 yrs