I need some real assistance.
I need some real assistance.
Hello, I'm experiencing a bunch of issues this week. I bought a Core I5 10400F with a Galax H410 motherboard. After setting it up, one of the capacitors near the CPU failed. It worked for six minutes before the capacitor blew again. I returned it and got a new Gigabyte H410 motherboard. Now it's functioning properly inside the case. However, it only runs when unboxed, not when installed. It shows strange behavior—turning on and off repeatedly, no display at all. I've tried reseating RAM, recharging the CMOS battery, using a single RAM stick, and even reinstalled the stand-off, but nothing helps. Right now it's safely kept in the cardboard box. I'm wondering if it will work if I install it in the actual motherboard case. I've attached a photo for your reference. My old H410 also didn't work when installed in a case. It powers on but doesn't show anything. Without the case, it works perfectly. Could you help figure out what's going wrong? Also, why does the box say it has an H510 chipset even though the motherboard is H410? Thanks for your advice!
It seems the connectors aren't in the right spot. Can you link them to the motherboard without using the case?
Sure, I've decided not to try it that way. I'll attempt it this time and share the updates later.
I tested it today and the front connectors appear to function properly. I attached a photo for your understanding. I linked the power switch pin, and it starts up. The issue isn’t with the standoffs—it might be something else.
Are the motherboard clips positioned correctly, or are you fastening it directly to the case? This could cause connection problems.
The situation might have led to the issue with the exploding first motherboard capacitor. It’s worth thinking about an alternative scenario.
Case is Antec NX200. I always check the setup before putting it in the case. When I first turned on the Galax board, it worked for about six minutes, then I noticed a pop noise and a burning odor. To my surprise, one of the capacitors close to the CPU failed.