I just completed the GPU and CPU stress tests - how are the results?
I just completed the GPU and CPU stress tests - how are the results?
Hello everyone.
I’m looking for someone with more experience.
I recently set up a new MOBO, added CPU and cooler RAM sticks, and kept the GPU and PSU unchanged.
The same goes for the case: I cleaned the fans and cabinet thoroughly before installing.
Here are the specifications:
Motherboard: MSI B650 Gaming Plus WIFI
CPU: AMD Ryzen 7 7700X
GPU: ASUS RTX 3070
RAM: G.Skill Flare X5 DDR5 6000mhz 32GB (16GB x 2)
CPU cooler: NZXT T120 CPU Fan 120mm
PSU: 750W RM Modular
OS: Windows 11 Pro (new)
Case: Fractal Design Meshify C Temp G
GPU test with Furmark – ran for 10 minutes:
https://imgur.com/a/bVWpnN0
View: https://imgur.com/a/bVWpnN0
CPU test with Cinabench – ran for 10 minutes (system fan speeds included):
https://imgur.com/a/jfXfcpQ
View: https://imgur.com/a/jfXfcpQ
Case layout/fan setup (RED = exhaust, BLUE = intake):
https://imgur.com/a/nDIPECs
View: https://imgur.com/a/nDIPECs
Please note that the front fans are 140mm, while the others are 120mm.
Would anyone take a moment to review and confirm everything looks correct?
I’m okay with the temperatures, but I’m not sure about the voltage or other details.
Thanks a lot!
I just put in a new MOBO, CPU, cooler, and RAM sticks. The GPU and PSU are unchanged. Did you reinstall your operating system?
750W PSU Corsair – Corsair is the brand, 750W is the claimed power rating. Could you tell me the model number and how old it is?
NZXT T120 CPU Fan 120mm – I’d prefer a more robust cooler if I were you.
The case appears to be a Fractal Define R6. If not, consider adding the exact make and model of your case.
Hi,
I made the changes as per the specifications. Investing in a better CPU cooler seems like a good idea—could be the reason your CPU reaches those high temperatures.
Hey - I thought I updated that info in my opening post.
Try refreshing perhaps? I'll copy it here as well
"
Hello everyone.
So I just installed a new MOBO, CPU + cooler and RAM sticks. GPU is the same and PSU is the same.
I also installed a brand new OS Windows 11 Pro as well as doing a thorough cleaning before installation.
Specs are as follows:
Motherboard: MSI B650 Gaming Plus WIFI Motherboard
CPU: AMD Ryzen 7 7700X
GPU: ASUS RTX 3070
RAM: G.Skill Flare X5 DDR5 6000mhz 32GB (16GB x 2)
CPU Cooler: NZXT T120 CPU Fan 120mm
PSU: 750W RM Modular
https://www.multitronic.fi/en/products/923851
(it's from 2013)
Case: Fractal Design Meshify C Temp G
Also, I'm not looking to overclock anything yet. Just to be able to game with relative ease - No rendering or video editing in mind.
The main concern that comes to mind is the PSU. I wouldn’t have a 12-year-old PSU near that PC. All these new parts are likely running on a power supply that’s probably well beyond its prime at this point. It was a decent unit back then, but degradation will cause it to produce less power than before, which is a risk in my view.
You might also consider upgrading the cooler. You don’t need anything extreme, but something like the Assassin or Bequiet Dark Rock would be better and can be found at fair prices depending on where you are.
Of course, the 7000 ryzens tend to overheat by design (which makes me a bit uneasy after years of working hard to keep temperatures down), but a superior cooler would give you more flexibility for performance gains.
The Thermalright peerless assassin is a solid choice. It's a dual tower model with two 120mm fans, and it should cost around 35 to 40 dollars on Amazon.
Ok thank you - I reccon I'll get a new PSU as well (didn't really think about that...)
There is a good deal ongoing on
MSI MAG A750GL PCIE5
in my country. Would that be good?
Also, because I am lazy at times and I just spent hours rebuilding my PC, can I reuse the same PSU cables from the old one into the new PSU? Or is that not recommended?
Edit: Nevermind, that is a stupid question.
Thanks!
Based on the reviews, the PSU appears to be in good condition. The main concern for me is the possible transient spikes that the 30 series might experience, but I expect it to be manageable.
I usually purchase Corsair RMx PSUs for my builds, so I may not be the most reliable source for a definitive answer. I hope someone here can confirm if this is the optimal choice.
Also, think about whether upgrading to a higher wattage unit offers more flexibility. For instance, when I upgraded from a 7900xtx to a 1200 watt power supply, I was considering a 1000 watt model but found the thermaltake gf3 1200 watt one available for just a few dollars more than similar 1000 watt options. It might be worth it to upgrade later if needed. Remember, power supplies tend to degrade over time, so even if they suggest a certain capacity, your unit may not consistently deliver that amount as it ages. Therefore, opting for a slightly higher wattage—like 850 or 1000—could provide better reliability in the long run.
As a supporter of positive pressure setups, and assuming the front intake fans are filtered, I would miss the top exhaust fan. Two intake units with one exhaust should help prevent dust accumulation in the case.
Additionally, if you intend to run your build stock without any overclocking, your cooling system should perform adequately. Keep in mind that turning on memory profiles (like XMP) will raise idle power usage slightly without much noticeable gain.