F5F Stay Refreshed Power Users Overclocking i increased my cpu speed because of some useful advice from others on this forum, but now the problem is temperature

i increased my cpu speed because of some useful advice from others on this forum, but now the problem is temperature

i increased my cpu speed because of some useful advice from others on this forum, but now the problem is temperature

Pages (2): 1 2 Next
A
AlfyGame
Member
50
02-20-2022, 04:02 AM
#1
I can handle 1.3 v and 4.5GHz, but what about lowering the voltage to 1.2v? Would it be safe? Running at 4.5GHz the temperatures stayed between 60-75, which isn’t extreme, but I’m concerned about potential losses around 2.5v. I want to use this OC continuously, but if the temperature wasn’t high during the stress test (around 40), that seems acceptable.
A
AlfyGame
02-20-2022, 04:02 AM #1

I can handle 1.3 v and 4.5GHz, but what about lowering the voltage to 1.2v? Would it be safe? Running at 4.5GHz the temperatures stayed between 60-75, which isn’t extreme, but I’m concerned about potential losses around 2.5v. I want to use this OC continuously, but if the temperature wasn’t high during the stress test (around 40), that seems acceptable.

K
kenken0724
Member
178
02-23-2022, 12:07 PM
#2
Stress tests such as p95 generate the most extreme possible situations. In reality, that's the highest temperature it could ever reach. During gaming, temperatures typically only reach around 70% of that level. Therefore, you're likely seeing gaming temperatures near 55°C. That's normal and perfectly fine; the CPU isn't affected at all.

A CPU operates within two ranges: operating range and throttle range. Temperatures fall into just one of these two categories. For a CPU, a temperature of 30°C is essentially the same as 80°C—it remains within the safe operating area.

Also, a change from 1.3v to 1.2v is significant enough to cause instability and crashes. When adjusting voltages, use increments of 0.005v rather than 0.1v. Additionally, factors like alternate voltages (system agent, PLL, VID, LLC, etc.) must also be considered.
K
kenken0724
02-23-2022, 12:07 PM #2

Stress tests such as p95 generate the most extreme possible situations. In reality, that's the highest temperature it could ever reach. During gaming, temperatures typically only reach around 70% of that level. Therefore, you're likely seeing gaming temperatures near 55°C. That's normal and perfectly fine; the CPU isn't affected at all.

A CPU operates within two ranges: operating range and throttle range. Temperatures fall into just one of these two categories. For a CPU, a temperature of 30°C is essentially the same as 80°C—it remains within the safe operating area.

Also, a change from 1.3v to 1.2v is significant enough to cause instability and crashes. When adjusting voltages, use increments of 0.005v rather than 0.1v. Additionally, factors like alternate voltages (system agent, PLL, VID, LLC, etc.) must also be considered.

S
Skywalkerziin
Junior Member
5
02-24-2022, 12:22 PM
#3
What program are you using to stress test and measure temps?
There's no downside to lowering voltage unless it makes the system unstable. That's the other half of OCing. Find the minimum voltage necessary.
S
Skywalkerziin
02-24-2022, 12:22 PM #3

What program are you using to stress test and measure temps?
There's no downside to lowering voltage unless it makes the system unstable. That's the other half of OCing. Find the minimum voltage necessary.

G
gongstrong28
Junior Member
41
02-24-2022, 06:20 PM
#4
perform prime95 stress test alongside real temperature monitoring
G
gongstrong28
02-24-2022, 06:20 PM #4

perform prime95 stress test alongside real temperature monitoring

H
hd66
Junior Member
2
02-24-2022, 10:15 PM
#5
Just because you don't like something doesn't mean it's an issue.
If it bothers you, don't rush through it. You won't get anything for nothing.
You can either adapt to it, since that's what Overclocking is about, or refrain from doing so.
H
hd66
02-24-2022, 10:15 PM #5

Just because you don't like something doesn't mean it's an issue.
If it bothers you, don't rush through it. You won't get anything for nothing.
You can either adapt to it, since that's what Overclocking is about, or refrain from doing so.

B
Bunkey
Member
148
02-25-2022, 10:14 AM
#6
What are your system specifications? If you're not comfortable with higher temperatures, avoid overclocking. Reducing voltage is acceptable as long as the system remains stable.
B
Bunkey
02-25-2022, 10:14 AM #6

What are your system specifications? If you're not comfortable with higher temperatures, avoid overclocking. Reducing voltage is acceptable as long as the system remains stable.

R
Ranger6800
Member
241
02-25-2022, 03:55 PM
#7
Instead of using 4.5GHZ at 1.3 volts, reduce the frequency to 4.5ghz and lower the voltage to 1.2 volts. Otherwise, you should endure that temperature because that's what overclocking does; otherwise, just don't overclock it.
R
Ranger6800
02-25-2022, 03:55 PM #7

Instead of using 4.5GHZ at 1.3 volts, reduce the frequency to 4.5ghz and lower the voltage to 1.2 volts. Otherwise, you should endure that temperature because that's what overclocking does; otherwise, just don't overclock it.

H
Heather_Games
Junior Member
40
02-25-2022, 04:16 PM
#8
Stress tests such as p95 generate the most extreme possible situations. In reality, that's the highest temperature it could ever reach. During gaming, temperatures typically only reach around 70% of that level. Therefore, you're likely seeing gaming temperatures near 55°C. That's normal and within acceptable limits; the CPU wouldn't notice any issues.

A CPU operates in two ranges: operating range and throttle range. Temperatures fall into just one of these two categories. At 30°C it's still within the operating range, similar to 80°C.

Also, a 1.3v to 1.2v difference is significant for a CPU—it will likely cause instability or crashes. When adjusting voltages, use increments of 0.005v rather than 0.1v. Additionally, factors like system agent, PLL, VID, LLC, and other variables should be considered, as they may require adjustments during testing.
H
Heather_Games
02-25-2022, 04:16 PM #8

Stress tests such as p95 generate the most extreme possible situations. In reality, that's the highest temperature it could ever reach. During gaming, temperatures typically only reach around 70% of that level. Therefore, you're likely seeing gaming temperatures near 55°C. That's normal and within acceptable limits; the CPU wouldn't notice any issues.

A CPU operates in two ranges: operating range and throttle range. Temperatures fall into just one of these two categories. At 30°C it's still within the operating range, similar to 80°C.

Also, a 1.3v to 1.2v difference is significant for a CPU—it will likely cause instability or crashes. When adjusting voltages, use increments of 0.005v rather than 0.1v. Additionally, factors like system agent, PLL, VID, LLC, and other variables should be considered, as they may require adjustments during testing.

B
BreddyBoom
Member
93
03-09-2022, 08:30 AM
#9
You should put your money into an LN2 cooler.
B
BreddyBoom
03-09-2022, 08:30 AM #9

You should put your money into an LN2 cooler.

C
csige791
Posting Freak
818
03-09-2022, 03:49 PM
#10
What about liquid helium? Hahahaha
C
csige791
03-09-2022, 03:49 PM #10

What about liquid helium? Hahahaha

Pages (2): 1 2 Next