F5F Stay Refreshed Hardware Desktop I have upgraded my computer, but it’s now extremely slow.

I have upgraded my computer, but it’s now extremely slow.

I have upgraded my computer, but it’s now extremely slow.

A
Anselhero
Senior Member
582
08-04-2023, 11:58 AM
#1
I recently changed my computer from an r5 3600 to an r5 7600. Everything appeared normal, it started up and connected to my storage, but I noticed difficulties with File Explorer and Discord loading slowly. Checking HWmonitor showed the CPU idle at 500mhz with a voltage of 0.5v. When I launched Valorant it took about 20 minutes to open and remained stuck at that frequency. I attempted various fixes including resetting the BIOS, adjusting the CPU and SOC voltage to 1.125, but nothing resolved the issue. The voltage increased slightly, yet the clock speed stayed unchanged. It seems the system is capped at 500mhz. I even installed a new OS just in case there were drive issues. Updated the motherboard drives and still faced problems. Temperatures were within normal ranges. Now I’m feeling frustrated but not ready to invest more in another motherboard. My friend suggested it could be the RAM, though I’m unsure. It might be the PSU needing additional pins for the CPU or a faulty motherboard or RAM timing. Here’s what I have: ASUS TUF b650M - plus WiFi R5 7600 DDR5 Corsair RAM 2x32 32-40-40-84 RTX 2060
A
Anselhero
08-04-2023, 11:58 AM #1

I recently changed my computer from an r5 3600 to an r5 7600. Everything appeared normal, it started up and connected to my storage, but I noticed difficulties with File Explorer and Discord loading slowly. Checking HWmonitor showed the CPU idle at 500mhz with a voltage of 0.5v. When I launched Valorant it took about 20 minutes to open and remained stuck at that frequency. I attempted various fixes including resetting the BIOS, adjusting the CPU and SOC voltage to 1.125, but nothing resolved the issue. The voltage increased slightly, yet the clock speed stayed unchanged. It seems the system is capped at 500mhz. I even installed a new OS just in case there were drive issues. Updated the motherboard drives and still faced problems. Temperatures were within normal ranges. Now I’m feeling frustrated but not ready to invest more in another motherboard. My friend suggested it could be the RAM, though I’m unsure. It might be the PSU needing additional pins for the CPU or a faulty motherboard or RAM timing. Here’s what I have: ASUS TUF b650M - plus WiFi R5 7600 DDR5 Corsair RAM 2x32 32-40-40-84 RTX 2060

B
Bro76
Member
126
08-07-2023, 12:01 AM
#2
No, I haven't checked your BIOS yet. Could you confirm if you've updated it recently?
B
Bro76
08-07-2023, 12:01 AM #2

No, I haven't checked your BIOS yet. Could you confirm if you've updated it recently?

I
Intheworld061
Member
62
08-07-2023, 03:46 AM
#3
I confirmed it and there was no significant change.
I
Intheworld061
08-07-2023, 03:46 AM #3

I confirmed it and there was no significant change.

M
MiLk_My_CoW69
Member
62
08-07-2023, 08:52 PM
#4
Choose to reinstall Windows or all drivers. It’s simpler to back up your files and perform a fresh installation. Don’t worry about the reading part.
M
MiLk_My_CoW69
08-07-2023, 08:52 PM #4

Choose to reinstall Windows or all drivers. It’s simpler to back up your files and perform a fresh installation. Don’t worry about the reading part.

D
dawgal
Member
126
08-07-2023, 11:10 PM
#5
You're asking about the meaning of "extra 4 pins" and which power supply unit (PSU) you're using. It seems you want to know what the PSU looks like and whether it supports your setup. The note suggests testing with just one RAM stick at the time, without a GPU, and using iGPU support. Updated September 18, 2023 by leclod.
D
dawgal
08-07-2023, 11:10 PM #5

You're asking about the meaning of "extra 4 pins" and which power supply unit (PSU) you're using. It seems you want to know what the PSU looks like and whether it supports your setup. The note suggests testing with just one RAM stick at the time, without a GPU, and using iGPU support. Updated September 18, 2023 by leclod.

T
Tropiko14
Member
201
08-07-2023, 11:51 PM
#6
The PSU only has 8-pin while your motherboard uses 12-pin, but the manufacturer says it shouldn't matter. You've already tried adding a RAM stick and are running fine without a GPU.
T
Tropiko14
08-07-2023, 11:51 PM #6

The PSU only has 8-pin while your motherboard uses 12-pin, but the manufacturer says it shouldn't matter. You've already tried adding a RAM stick and are running fine without a GPU.

B
BlurryFacess
Junior Member
15
08-14-2023, 04:07 AM
#7
It should work fine on a single 8-pin connector. Consider downgrading the BIOS to version 1601 since it includes the AGESA update. Once updated, you should be able to install one of the never ones.
B
BlurryFacess
08-14-2023, 04:07 AM #7

It should work fine on a single 8-pin connector. Consider downgrading the BIOS to version 1601 since it includes the AGESA update. Once updated, you should be able to install one of the never ones.

S
SevereWarning
Member
64
08-14-2023, 05:45 AM
#8
I don't understand what AGESA does, but I'll definitely give it a shot.
S
SevereWarning
08-14-2023, 05:45 AM #8

I don't understand what AGESA does, but I'll definitely give it a shot.

S
Soruz
Member
63
08-14-2023, 06:04 AM
#9
Share images of your BIOS overclocking setup—stock cooler or a solid aftermarket option. Provide a manual OC setting to lock the CPU at a specific speed, such as 5.4GHz, 1.35V, or 1.05V with 4.7-4.8GHz (LLC off).
S
Soruz
08-14-2023, 06:04 AM #9

Share images of your BIOS overclocking setup—stock cooler or a solid aftermarket option. Provide a manual OC setting to lock the CPU at a specific speed, such as 5.4GHz, 1.35V, or 1.05V with 4.7-4.8GHz (LLC off).