F5F Stay Refreshed Hardware Desktop I face multiple issues prior to purchasing a UPS.

I face multiple issues prior to purchasing a UPS.

I face multiple issues prior to purchasing a UPS.

D
DingoM8
Junior Member
19
02-10-2018, 05:47 AM
#1
So I've been considering buying a UPS, as I want my computer to last in the long run. I bought my computer three years ago during the pandemic, as online classes in my high school were pretty much the norm. I've been doing well since then, but I live in the Philippines and the electricity here likes to play sick jokes were it'll suddenly go out be it power outages or maintenance with any warning whatsoever. I bought my computer three years ago and I've been using it for online classes, gaming, and rendering large gigabytes of game footage in Premiere Pro using OBS for recording.
Here are my specs:
CPU: Ryzen 5 2600
Motherboard: MSI B450M Mortar Max
RAM: 2x Kingston 8gb 2666mhz DDR4 Fury Black
SSD: Adata 256gb XPG SX6000 Pro PCIE NVME M.2
HDD: Seagate Barracuda 2TB (ST2000M008) & Seagate Barracuda 1TB (ST1000D010)
PSU: EVGA 600w 80+ Bronze Non Mudular Power Supply
Case: NZXT H500
GPU: MSI GTX 1650 Super Aero ITX OC 4G GDDR6
Monitor: Philips 227E
Other stuffs plugged into my pc:
Microphone AT2005USB
PS4 Controller
USB Ringlight
Anker USB Hub
Logitech C922 Webcam
Here are the problems:
1.)
The outlets in our house are all pretty much like this one right here and are not grounded. I've been using a surge protector with a cheater's plug that is plugged at the wall outlet, and embarrassing as it may seem, I've recently just found out that surge protectors need grounded outlet to work properly (It's miracle I'm still alive). Unfortunately, our renovated house is old fashioned and it was renovated using the usable parts from our older house, so most of the wiring is old as well.
Here is the picture of our wall outlet
https://imgur.com/iuCMsnB
View: https://i.imgur.com/iuCMsnB.jpg
2.)
It is more recommended to use a pure sine wave UPS for PSU that has APFC, but they're really expensive for me . But I've read and from my understanding in a EVGA forum that all power supplies can support simulated sine wave just fine, so long as that the simulated sine wave UPS is from a reputable brand like APC and such.
3.)
Someone recommended me a Cyberpower UPS 1050va/630w called
UT1050EG
and
UT1100EG
which has 1100va/630w. I went and look through the product details and it said "This UPS model is not applicable for PSU Computers". So I decided to chat Cyberpower directly, and they told me to get
CP1500EPFCLCD UPS
instead, which is too expensive, and is overkill for my barely mid computer. Also, there were some people who bought and reviewed the UT1050EG AND UT1100EG said both of the UPS were working with their computer just fine. So the whole thing was just confusing for me.
Picture of the UT1050EG AND UT1100EG
https://imgur.com/THYh8Vv
View: https://imgur.com/THYh8Vv
4.)
I just want to able protect my computer from voltage spikes and all that crap, and save my progress be it on my class or when I'm playing games and safely shutdown it without any worries. I want this computer to last since it already took a hit several times before, causing one my ram channels or perhaps the ram sticks to malfunction which made made my computer power down randomly back then. I fixed it by removing the two ram sticks which is why I'm only unly using 16gb now instead of 32gb. That was two years ago, and my computer didn't hav any problems since then, but the electricity here is just so unpredictable
,
I want to make sure my computer's component won't suffer in case it happens again.
That's pretty much it. I could use some of your opinions regarding this since I didn't really get much from Reddit.
D
DingoM8
02-10-2018, 05:47 AM #1

So I've been considering buying a UPS, as I want my computer to last in the long run. I bought my computer three years ago during the pandemic, as online classes in my high school were pretty much the norm. I've been doing well since then, but I live in the Philippines and the electricity here likes to play sick jokes were it'll suddenly go out be it power outages or maintenance with any warning whatsoever. I bought my computer three years ago and I've been using it for online classes, gaming, and rendering large gigabytes of game footage in Premiere Pro using OBS for recording.
Here are my specs:
CPU: Ryzen 5 2600
Motherboard: MSI B450M Mortar Max
RAM: 2x Kingston 8gb 2666mhz DDR4 Fury Black
SSD: Adata 256gb XPG SX6000 Pro PCIE NVME M.2
HDD: Seagate Barracuda 2TB (ST2000M008) & Seagate Barracuda 1TB (ST1000D010)
PSU: EVGA 600w 80+ Bronze Non Mudular Power Supply
Case: NZXT H500
GPU: MSI GTX 1650 Super Aero ITX OC 4G GDDR6
Monitor: Philips 227E
Other stuffs plugged into my pc:
Microphone AT2005USB
PS4 Controller
USB Ringlight
Anker USB Hub
Logitech C922 Webcam
Here are the problems:
1.)
The outlets in our house are all pretty much like this one right here and are not grounded. I've been using a surge protector with a cheater's plug that is plugged at the wall outlet, and embarrassing as it may seem, I've recently just found out that surge protectors need grounded outlet to work properly (It's miracle I'm still alive). Unfortunately, our renovated house is old fashioned and it was renovated using the usable parts from our older house, so most of the wiring is old as well.
Here is the picture of our wall outlet
https://imgur.com/iuCMsnB
View: https://i.imgur.com/iuCMsnB.jpg
2.)
It is more recommended to use a pure sine wave UPS for PSU that has APFC, but they're really expensive for me . But I've read and from my understanding in a EVGA forum that all power supplies can support simulated sine wave just fine, so long as that the simulated sine wave UPS is from a reputable brand like APC and such.
3.)
Someone recommended me a Cyberpower UPS 1050va/630w called
UT1050EG
and
UT1100EG
which has 1100va/630w. I went and look through the product details and it said "This UPS model is not applicable for PSU Computers". So I decided to chat Cyberpower directly, and they told me to get
CP1500EPFCLCD UPS
instead, which is too expensive, and is overkill for my barely mid computer. Also, there were some people who bought and reviewed the UT1050EG AND UT1100EG said both of the UPS were working with their computer just fine. So the whole thing was just confusing for me.
Picture of the UT1050EG AND UT1100EG
https://imgur.com/THYh8Vv
View: https://imgur.com/THYh8Vv
4.)
I just want to able protect my computer from voltage spikes and all that crap, and save my progress be it on my class or when I'm playing games and safely shutdown it without any worries. I want this computer to last since it already took a hit several times before, causing one my ram channels or perhaps the ram sticks to malfunction which made made my computer power down randomly back then. I fixed it by removing the two ram sticks which is why I'm only unly using 16gb now instead of 32gb. That was two years ago, and my computer didn't hav any problems since then, but the electricity here is just so unpredictable
,
I want to make sure my computer's component won't suffer in case it happens again.
That's pretty much it. I could use some of your opinions regarding this since I didn't really get much from Reddit.

M
MollyM00
Member
197
02-10-2018, 09:29 AM
#2
Great UPS.
👍
True/pure sine wave, line-interactive topology.
I have very same ones in use for me as well, times two (each backing up their own dedicated PC). Though, mine are 1300VA/780W ones.
Yeah.... No.
When looking for an UPS, there are 2 things to look out:
1. Output waveform (square wave, simulated sine wave and true/pure sine wave)
2. Design (stand-by, line-interactive and online)
From here you can read about the differences between output waveform,
link:
https://www.kstar.com/indexproblem/17355.jhtml
And here are explanations about the UPS design,
link:
https://www.eetimes.com/document.asp?doc_id=1272971
Waveform and design
For PCs, line-interactive UPS would be more than enough since PSUs can easily handle the 2ms to 5ms transfer time of line-interactive UPS.
As far as output waveform goes, true/pure sine wave UPS is best used. While simulated sine wave UPSes are cheaper than true/pure sine wave UPSes, PSUs with Active PFC aren't compatible with simulated sine wave. You might get simulated sine wave UPS running with Active PFC PSU but there can be some major issues. Here's what, how and why.
How do you know which PSUs have Active PFC and which ones don't?
Simple, every PSU that has 80+ certification (e.g 80+ Bronze or 80+ Gold) has Active PFC.
What is Active PFC?
Further reading:
https://en.wikipedia.org/wiki/Power_fact...near_loads
What can happen when using simulated sine wave UPS with Active PFC PSU?
When simulated sine wave UPS switches over to the battery power, one of 3 things can happen:
1. UPS displays error resulting PC to shut down immediately.
2. UPS shuts down resulting PC to shut down immediately.
3. UPS switches to battery power resulting PC to power off from UPS (PC stays on).
Why it happens?
Simulated sine wave UPS produces a zero output state during the phase change cycle resulting in a power “gap”. This gap may cause power interruption for active PFC PSUs when switching from AC power output to simulated sine wave output (battery mode).
What to do next?
As stated above, your PC can run off from simulated sine wave UPS but be prepared when you face issues with it. When issues do rise, your best bet would be returning the simulated sine wave UPS and getting true/pure sine wave UPS. Or you can go with true/pure sine wave UPS off the bat.
Wattage
As far as UPS wattage goes, you need to consider the power draw of your PC and monitors. Maybe speakers and wi-fi router too if you plan to plug those into the UPS as well. Though, printers, scanners and other such hardware (full list on your UPS manual) don't plug to the UPS since their startup power draw is way too much for UPS to handle and you can fry your UPS.
Taking PSU's max wattage as a baseline is good idea since it will give your UPS more headroom and you can get longer runtime out of your UPS. Since your PSU is 600W (a low quality PSU, which is a shame
😒
), at least one monitor is added on top of it. Depending on the monitor size, they use between 23W to 52W. For more accurate power consumption, i need to know your monitor make and model so i can look up it's power consumption. Wi-fi routers don't consume much power. For example, my Cisco EPC3940L consumes 12V at 3A which means 36W.
Good UPS brands to go for are CyberPower, TrippLite and APC. While there are other UPS brands as well, those three are the best out there.
Note: The more powerful UPS you have, the longer UPS can keep your PC running before it's battery is empty.
With what i said above, and also what CyberPower suggested for you, i'd suggest that you look into the same UPS as i have, the 1300VA/780W one,
specs:
https://www.cyberpower.com/eu/en/product...300epfclcd
It isn't overkill for your setup and also costs less than 1500VA/900W one CyberPower suggested for you.
There is also 900VA/540W UPS from the same series,
specs:
https://www.cyberpower.com/eu/en/product...900epfclcd
This won't give you wattage headroom and would only last few minutes during blackout. Perhaps too short of a time to safely save all your work and shut down PC normally, especially when you don't happen to be behind PC. But it would be the cheapest option within the CyberPower PFC Sinewave lineup.
The 1300VA/780W unit, which i have, can last easy 10 mins during blackout. Even more when we don't do heavy tasks with our PCs. That's ample time to save all our work and safely shut down the PC, even when we doesn't happen to be at PC when blackout occurs.
It seems that you've greatly underestimated the cost of a proper, good quality UPS. Since UPS'es job is to keep your PC running when there's blackout by supplying good and stable electricity to your PC, they also cost a lot of money.
For example, i payed €230 Euros for one of my CyberPower CP1300EPFCLCD (1300VA/780W, true/pure sine wave, line-interactive) UPS and i have two of them in use, one for Skylake build and another for Haswell build (full specs with pics in my sig). That makes ₱13742.19 Peso in your currency, per one UPS.
Since your PC is expensive, it's not easily replaced. Like it or not, if you want the protection, it's not going to be cheap. Though, if you want cheap and good UPS, you need to buy 2x UPSes; the cheap one and the good one.
I'll end my reply with one possible scenario;
Let's say you cheap out on UPS and get a simulated sine wave UPS. You buy it, haul it to your home, spend time and effort to hook it up and when blackout comes, UPS fails to keep your PC running, either switching itself off or switch over time is too long for PSU to handle. Then what? You have an UPS that is useless for you, with your money spent.
Can you return the bought and used UPS to get your money back? If not, then you have hunk of an UPS, that has little value and you
still
need to come up with money to buy proper, true/pure sine wave UPS. This will end up costing you far more time, effort and money, than going with true/pure sine wave UPS off the bat.
But your call; if you have time, effort and money to spend on that lottery with the hopes of "maybe it works", then go ahead.
I don't buy my hardware based on hope (if it works), but based on guarantee that it will work as advertised.
M
MollyM00
02-10-2018, 09:29 AM #2

Great UPS.
👍
True/pure sine wave, line-interactive topology.
I have very same ones in use for me as well, times two (each backing up their own dedicated PC). Though, mine are 1300VA/780W ones.
Yeah.... No.
When looking for an UPS, there are 2 things to look out:
1. Output waveform (square wave, simulated sine wave and true/pure sine wave)
2. Design (stand-by, line-interactive and online)
From here you can read about the differences between output waveform,
link:
https://www.kstar.com/indexproblem/17355.jhtml
And here are explanations about the UPS design,
link:
https://www.eetimes.com/document.asp?doc_id=1272971
Waveform and design
For PCs, line-interactive UPS would be more than enough since PSUs can easily handle the 2ms to 5ms transfer time of line-interactive UPS.
As far as output waveform goes, true/pure sine wave UPS is best used. While simulated sine wave UPSes are cheaper than true/pure sine wave UPSes, PSUs with Active PFC aren't compatible with simulated sine wave. You might get simulated sine wave UPS running with Active PFC PSU but there can be some major issues. Here's what, how and why.
How do you know which PSUs have Active PFC and which ones don't?
Simple, every PSU that has 80+ certification (e.g 80+ Bronze or 80+ Gold) has Active PFC.
What is Active PFC?
Further reading:
https://en.wikipedia.org/wiki/Power_fact...near_loads
What can happen when using simulated sine wave UPS with Active PFC PSU?
When simulated sine wave UPS switches over to the battery power, one of 3 things can happen:
1. UPS displays error resulting PC to shut down immediately.
2. UPS shuts down resulting PC to shut down immediately.
3. UPS switches to battery power resulting PC to power off from UPS (PC stays on).
Why it happens?
Simulated sine wave UPS produces a zero output state during the phase change cycle resulting in a power “gap”. This gap may cause power interruption for active PFC PSUs when switching from AC power output to simulated sine wave output (battery mode).
What to do next?
As stated above, your PC can run off from simulated sine wave UPS but be prepared when you face issues with it. When issues do rise, your best bet would be returning the simulated sine wave UPS and getting true/pure sine wave UPS. Or you can go with true/pure sine wave UPS off the bat.
Wattage
As far as UPS wattage goes, you need to consider the power draw of your PC and monitors. Maybe speakers and wi-fi router too if you plan to plug those into the UPS as well. Though, printers, scanners and other such hardware (full list on your UPS manual) don't plug to the UPS since their startup power draw is way too much for UPS to handle and you can fry your UPS.
Taking PSU's max wattage as a baseline is good idea since it will give your UPS more headroom and you can get longer runtime out of your UPS. Since your PSU is 600W (a low quality PSU, which is a shame
😒
), at least one monitor is added on top of it. Depending on the monitor size, they use between 23W to 52W. For more accurate power consumption, i need to know your monitor make and model so i can look up it's power consumption. Wi-fi routers don't consume much power. For example, my Cisco EPC3940L consumes 12V at 3A which means 36W.
Good UPS brands to go for are CyberPower, TrippLite and APC. While there are other UPS brands as well, those three are the best out there.
Note: The more powerful UPS you have, the longer UPS can keep your PC running before it's battery is empty.
With what i said above, and also what CyberPower suggested for you, i'd suggest that you look into the same UPS as i have, the 1300VA/780W one,
specs:
https://www.cyberpower.com/eu/en/product...300epfclcd
It isn't overkill for your setup and also costs less than 1500VA/900W one CyberPower suggested for you.
There is also 900VA/540W UPS from the same series,
specs:
https://www.cyberpower.com/eu/en/product...900epfclcd
This won't give you wattage headroom and would only last few minutes during blackout. Perhaps too short of a time to safely save all your work and shut down PC normally, especially when you don't happen to be behind PC. But it would be the cheapest option within the CyberPower PFC Sinewave lineup.
The 1300VA/780W unit, which i have, can last easy 10 mins during blackout. Even more when we don't do heavy tasks with our PCs. That's ample time to save all our work and safely shut down the PC, even when we doesn't happen to be at PC when blackout occurs.
It seems that you've greatly underestimated the cost of a proper, good quality UPS. Since UPS'es job is to keep your PC running when there's blackout by supplying good and stable electricity to your PC, they also cost a lot of money.
For example, i payed €230 Euros for one of my CyberPower CP1300EPFCLCD (1300VA/780W, true/pure sine wave, line-interactive) UPS and i have two of them in use, one for Skylake build and another for Haswell build (full specs with pics in my sig). That makes ₱13742.19 Peso in your currency, per one UPS.
Since your PC is expensive, it's not easily replaced. Like it or not, if you want the protection, it's not going to be cheap. Though, if you want cheap and good UPS, you need to buy 2x UPSes; the cheap one and the good one.
I'll end my reply with one possible scenario;
Let's say you cheap out on UPS and get a simulated sine wave UPS. You buy it, haul it to your home, spend time and effort to hook it up and when blackout comes, UPS fails to keep your PC running, either switching itself off or switch over time is too long for PSU to handle. Then what? You have an UPS that is useless for you, with your money spent.
Can you return the bought and used UPS to get your money back? If not, then you have hunk of an UPS, that has little value and you
still
need to come up with money to buy proper, true/pure sine wave UPS. This will end up costing you far more time, effort and money, than going with true/pure sine wave UPS off the bat.
But your call; if you have time, effort and money to spend on that lottery with the hopes of "maybe it works", then go ahead.
I don't buy my hardware based on hope (if it works), but based on guarantee that it will work as advertised.

T
TdmFan92
Senior Member
602
02-11-2018, 11:32 AM
#3
I understand that UPS can be costly. I was simply trying to confirm if there are any alternatives for budget considerations since I’m not very familiar with this. My circumstances as a student are quite limited, and spending a large sum like that is challenging. Plus, there are other factors to think about before purchasing an expensive UPS, such as its availability in the Philippines.

I regret if my entire message came across as naive or made assumptions. It appears your reaction was based on tone rather than content. In any case, I’ll wait for feedback from others here to tackle the remaining issues mentioned.
T
TdmFan92
02-11-2018, 11:32 AM #3

I understand that UPS can be costly. I was simply trying to confirm if there are any alternatives for budget considerations since I’m not very familiar with this. My circumstances as a student are quite limited, and spending a large sum like that is challenging. Plus, there are other factors to think about before purchasing an expensive UPS, such as its availability in the Philippines.

I regret if my entire message came across as naive or made assumptions. It appears your reaction was based on tone rather than content. In any case, I’ll wait for feedback from others here to tackle the remaining issues mentioned.

P
Puppzi
Member
209
02-12-2018, 10:15 AM
#4
Everything related to power delivery demands serious attention. It’s not about cutting corners or opting for a cheaper path. This is true because if a power delivery device fails—whether it's a PSU or UPS—it can cause fires, destroy homes, and even result in loss of life.

For instance:
https://www.thesundaily.my/archive/...we...ARCH461974

High-quality hardware is crafted with great care and includes many protective measures to avoid such disastrous failures that could end lives. Although these devices are more costly to produce, they are also pricier to purchase.

Or consider this perspective: would the loss of your home and loved ones be more valuable than approximately ₱6000 Peso? Based on my estimate, a simulated sine wave UPS would cost significantly less than a genuine, pure sine wave one.

Also, as I previously discussed, your PSU is of low quality. Sure, it may have been affordable and functional, but the question remains: how long will it last?

The lower the quality of your PSU, the greater the risk of it failing catastrophically—and the more likely it is to damage everything connected to it, including your entire PC. The article above highlighted what low-quality PSUs can do.

Since the PSU is a critical part of power delivery and supplies power to all components inside your PC, it is the most vital component within the system. Therefore, never compromise on its quality. The same applies to UPS units as well.

I may seem harsh, but if you grasp why (loss of life is a serious matter), then you’ll understand my strong stance on this.

In your case, the best choice would be to purchase a laptop. When the main power fails, laptops have internal batteries that keep them operational. For students, a decent office laptop is sufficient for academic tasks. Even light gaming can be handled with one.

Dedicated (hardcore) gaming should be reserved for later, once you have a reliable UPS to safeguard your desktop PC.
P
Puppzi
02-12-2018, 10:15 AM #4

Everything related to power delivery demands serious attention. It’s not about cutting corners or opting for a cheaper path. This is true because if a power delivery device fails—whether it's a PSU or UPS—it can cause fires, destroy homes, and even result in loss of life.

For instance:
https://www.thesundaily.my/archive/...we...ARCH461974

High-quality hardware is crafted with great care and includes many protective measures to avoid such disastrous failures that could end lives. Although these devices are more costly to produce, they are also pricier to purchase.

Or consider this perspective: would the loss of your home and loved ones be more valuable than approximately ₱6000 Peso? Based on my estimate, a simulated sine wave UPS would cost significantly less than a genuine, pure sine wave one.

Also, as I previously discussed, your PSU is of low quality. Sure, it may have been affordable and functional, but the question remains: how long will it last?

The lower the quality of your PSU, the greater the risk of it failing catastrophically—and the more likely it is to damage everything connected to it, including your entire PC. The article above highlighted what low-quality PSUs can do.

Since the PSU is a critical part of power delivery and supplies power to all components inside your PC, it is the most vital component within the system. Therefore, never compromise on its quality. The same applies to UPS units as well.

I may seem harsh, but if you grasp why (loss of life is a serious matter), then you’ll understand my strong stance on this.

In your case, the best choice would be to purchase a laptop. When the main power fails, laptops have internal batteries that keep them operational. For students, a decent office laptop is sufficient for academic tasks. Even light gaming can be handled with one.

Dedicated (hardcore) gaming should be reserved for later, once you have a reliable UPS to safeguard your desktop PC.