I completed my RAM at its maximum capacity.

Jerryx01
Posting Freak

870

07-10-2016, 07:41 PM

I accidentally set my 3200mhz RAM to 3600mhz and now it’s not showing anything, though the system powers on. Help needed. Edit: motherboard output is off.

Jerryx01

07-10-2016, 07:41 PM #1

I accidentally set my 3200mhz RAM to 3600mhz and now it’s not showing anything, though the system powers on. Help needed. Edit: motherboard output is off.

Mollidae
Junior Member

07-10-2016, 10:06 PM

Overclocking rarely causes hardware failure. Inspect your monitor cable, it might be disconnected. Identify the motherboard model you're using. Restart your BIOS, set RAM to its default speed, then turn XMP back on.

Mollidae

07-10-2016, 10:06 PM #2

Qandii
Member

233

07-11-2016, 06:22 AM

You need to restart your device to reset the BIOS settings without using the display.

Qandii

07-11-2016, 06:22 AM #3

You need to restart your device to reset the BIOS settings without using the display.

JamesHond7
Posting Freak

838

07-22-2016, 05:59 PM

Disconnect the power source, remove the battery from the motherboard, let it rest for a while, then reinstall everything.

JamesHond7

07-22-2016, 05:59 PM #4

Disconnect the power source, remove the battery from the motherboard, let it rest for a while, then reinstall everything.

mikeyii
Junior Member

07-28-2016, 01:06 PM

It varies by motherboard; some include a reset button on the I/O, others have a CMOS jumper built-in, or you might just take out the battery. Are you relying on built-in graphics?

mikeyii

07-28-2016, 01:06 PM #5

It varies by motherboard; some include a reset button on the I/O, others have a CMOS jumper built-in, or you might just take out the battery. Are you relying on built-in graphics?

goolst2003
Member

217

07-28-2016, 09:53 PM

goolst2003

07-28-2016, 09:53 PM #6

roger55
Junior Member

07-28-2016, 11:45 PM

This usually isn't long enough. My friend removed the battery for 10 minutes, but it wasn't sufficient. After that, he left it off overnight and it worked. @Perfectpolar you can also reset the BIOS using the CMOS pins. You can search online for instructions on using the CMOS pins on your motherboard.

roger55

07-28-2016, 11:45 PM #7

daned33
Junior Member

07-29-2016, 04:40 AM

Aaaa

daned33

07-29-2016, 04:40 AM #8

Aaaa

xanderzone317
Posting Freak

957

08-12-2016, 02:47 PM

It means he used a PSU packed with large capacitor storage. You might (not strongly recommended) press the power button while the power is disconnected to speed up draining those capacitors, avoiding overnight delays.

xanderzone317

08-12-2016, 02:47 PM #9