I checked my PC and found that connecting the Samsung Evo 860 1TB SSD doesn't allow it to boot.
I checked my PC and found that connecting the Samsung Evo 860 1TB SSD doesn't allow it to boot.
PC Specifications
Auros 550 pro mobo, GTX 1060 6gbs.
Ryzen 3900x processor, 16 GB RAM, ballistic storage, EVGA 600W PCU, WD Black 850 m.2 drive, Samsung Evo 860 1TB.
Two 8TB HDDs, Windows 10 operating system.
I cleaned my PC using a vacuum cleaner and attempted to boot it. When I tried to access BIOS or perform any other tasks, I encountered the Auros logo and was unable to proceed. After double-checking all connections, I researched and discovered that disconnecting all hard drives except the M.2 one resolved the issue, allowing the system to boot normally.
The problem persists when attempting to connect the Samsung Evo 860 1TB drive, which again triggers the Auros logo.
Previous troubleshooting steps:
1. Unplugged and replugged all SATA cables.
2. Switched the cables even within the same mode.
3. Removed the BIOS battery.
4. Some suggested testing the SSD on another PC, but I don’t have another one. My family mainly uses iPads and smartphones.
Hi, just a quick suggestion to verify your Primary Boot Order in the BIOS. Confirm that your Windows 10 Boot drive is marked as Boot First and the other drives are disabled. This should ensure the PC starts only from your Windows 10 drive. Good luck! Please share your results.
For the beginning, I would unplug the 860 1TB, enter the BIOS and navigate to the Boot menu. Find "Full Screen LOGO Show" and turn it off. This will let you observe the startup process rather than being obscured by a confusing Auros logo.
The PSU make and model (or part number) is? Its age is also a question, and whether the PSU was purchased new or used/refurbished. Regarding the vacuum, since common ones generate static electricity and can damage components when used for dust removal, either the 860 Evo is non-functional or its SATA port on MoBo is dead. Your MoBo has six SATA ports; test connecting the drive to another port and checking if it appears in BIOS. If all six ports are tried and the drive still doesn't show up, it's likely the 860 Evo is dead. You might also try using the drive on a different PC to see if it appears there.