F5F Stay Refreshed Hardware Desktop I burned my EVGA NVIDA 2080.

I burned my EVGA NVIDA 2080.

I burned my EVGA NVIDA 2080.

C
CharlieMcD14
Member
Find
64
08-31-2018, 01:27 AM
#1
Hello, your EVGA NVIDIA 2080 has suffered damage to the port where the heat sink and fan connectors are attached. This issue may be fixable depending on the extent of the burnout. Check if the components can be replaced or repaired. Otherwise, it might be best to consider disposal. Let me know if you need more details. Thanks!
Reply
Reply
C
CharlieMcD14
08-31-2018, 01:27 AM #1

Hello, your EVGA NVIDIA 2080 has suffered damage to the port where the heat sink and fan connectors are attached. This issue may be fixable depending on the extent of the burnout. Check if the components can be replaced or repaired. Otherwise, it might be best to consider disposal. Let me know if you need more details. Thanks!

Reply
Reply
S
steel51
Member
Find
205
08-31-2018, 05:30 PM
#2
It could depend on your skill with a multimeter and soldering, but I’m not sure this part is usually running the heatsink fans independently.
Reply
Reply
S
steel51
08-31-2018, 05:30 PM #2

It could depend on your skill with a multimeter and soldering, but I’m not sure this part is usually running the heatsink fans independently.

Reply
Reply
N
niclasdam
Member
Find
175
08-31-2018, 09:51 PM
#3
Hi, Did you purchase this item directly from the store or are you buying it secondhand? The model details match EVGA GeForce RTX 2070 SUPER BLACK GAMING, 08G - P4 - 3071 - KR. It doesn’t appear to be an RTX 2080 version. Seems like someone has already performed a repair on the card.
Reply
Reply
N
niclasdam
08-31-2018, 09:51 PM #3

Hi, Did you purchase this item directly from the store or are you buying it secondhand? The model details match EVGA GeForce RTX 2070 SUPER BLACK GAMING, 08G - P4 - 3071 - KR. It doesn’t appear to be an RTX 2080 version. Seems like someone has already performed a repair on the card.

Reply
Reply
F
FairyGirl21
Member
Find
193
08-31-2018, 10:07 PM
#4
You just had a burn yesterday. You haven’t tried any fixes yet because you’re new to that. The item was purchased from Amazon about four years ago. The warranty info on EVGA shows it as 2800 RTX and mentions it lit up on the side. Any chance it’s still usable or is it a total loss?
Reply
Reply
F
FairyGirl21
08-31-2018, 10:07 PM #4

You just had a burn yesterday. You haven’t tried any fixes yet because you’re new to that. The item was purchased from Amazon about four years ago. The warranty info on EVGA shows it as 2800 RTX and mentions it lit up on the side. Any chance it’s still usable or is it a total loss?

Reply
Reply
E
EmmaRosie629
Senior Member
Find
459
09-01-2018, 11:30 AM
#5
PCB is damaged but still functional; it’s safer to keep it as a spare or discard it. The issue was that it melted through multiple layers, especially the inner ones, which caused the burnout.
Reply
Reply
E
EmmaRosie629
09-01-2018, 11:30 AM #5

PCB is damaged but still functional; it’s safer to keep it as a spare or discard it. The issue was that it melted through multiple layers, especially the inner ones, which caused the burnout.

Reply
Reply
C
caelang1
Junior Member
Find
3
09-01-2018, 02:45 PM
#6
Consider reaching out to the BadCaps forum members, as they have more experience with this topic. Someone should be able to recreate tracks affected by heat. It doesn't seem severe, but you might want to ask them.
Reply
Reply
C
caelang1
09-01-2018, 02:45 PM #6

Consider reaching out to the BadCaps forum members, as they have more experience with this topic. Someone should be able to recreate tracks affected by heat. It doesn't seem severe, but you might want to ask them.

Reply
Reply
R
RageGlitch
Posting Freak
Find
771
09-01-2018, 04:58 PM
#7
I think getting a second view would help, though I feel it might not change much based on what I mentioned earlier. When a burn reaches beneath the surface layer of a PCB, it's often impossible to fix it. Still, it's hard to say for sure.
Reply
Reply
R
RageGlitch
09-01-2018, 04:58 PM #7

I think getting a second view would help, though I feel it might not change much based on what I mentioned earlier. When a burn reaches beneath the surface layer of a PCB, it's often impossible to fix it. Still, it's hard to say for sure.

Reply
Reply