I believe the RAM might have caused issues during the OC process.
I believe the RAM might have caused issues during the OC process.
I have G.Skill ripjaws 5 ddr4 at 2666mhz, but it normally runs at 2133mhz. I adjusted it to 2666 and after playing GTA V on full settings, everything worked smoothly with good frames. However, the game froze and I had to shut it down using the power button instead of a normal shutdown. When I turned it back on, the screen displayed "overclock failed," and I thought it might be related to the RAM since that's the only component set to 2666 speed.
Keep it at 2133mhz, it's sufficient. Everything will work fine on the computer. If you need to raise the frequency, just reinstall the OS.
This typically occurs when RAM is clocked too fast (for the timing settings). You should relax the timing parameters, I'm sure it will work. For instance, increase +2 on the first four numbers. The sequence changes from 11-11-11-30 to 13-13-13-34 (the last number should be even). For example.
If the system boots and runs smoothly, you might attempt tighter timing (lower values).
Restoring the OS won't help.
You might consider using the XMP profile, as it should adjust the memory to rated values. If not, perform the adjustment manually. Re-test the system afterward.