I believe I damaged my motherboard.
I believe I damaged my motherboard.
I mistakenly put the RAM in the wrong slot and it fried because of my lack of PC knowledge. Now the motherboard isn’t showing anything, and it doesn’t even acknowledge that I’m missing RAM. Did I also harm the motherboard? The CPU is an AMD Ryzen 2400G, the GPU is an EVGA RTX 2060, the RAM is Fury HyperX 8GB-2933MHz (8GBx1), the motherboard is ASUS EX-A320M GAMING, the power supply is Seasonic S12II 650W, storage is WD 1TB HDD.
It seems there was an issue with alignment. When it doesn’t match, the insertion won’t work.
I believe I swapped the components, so... yes, someone in another discussion suggested I might have damaged the RAM chips, and they asked if I should also purchase a motherboard.
Errors occur sometimes. As experience suggests, wisdom grows from making mistakes or observing others' errors. To avoid repeating this, keep in mind that RAM slots are designed with a specific orientation—long side facing forward and short side opposite. Always align them correctly; never insert RAM in the dark. Thirdly, there are three distinct types of RAM connectors. Each demands even insertion until resistance appears, then you must activate the locking feature. The first type (not universally preferred) uses a double push lever: both sides must be inserted and both levers must click into place. Removing it involves pushing both sides in, which can be tricky if the latch doesn’t fully engage on both sides. The second connector is hybrid: one side has a latch while the other has a guide. It secures RAM tightly; simply push the unlatched side first until you hear a click, then move the lever down. To take it out, just push the lever side in to release it. The last type is the value connector, featuring only one side with a latch and the other with no features at all. This design was widely disliked because it offered no guidance during removal.
You found the hybrid connector on your motherboard without placing it in the dark. You noticed no change in pin appearance before and after the notch, so you assumed they work both ways. It’s good to learn from mistakes—thank you for your patience.