I am here to assist you. Please let me know how I can help.

OogaWooga
Junior Member

03-07-2023, 08:34 AM

You’re starting from scratch with your setup. The red light for CPU and memory is indicating a hardware issue. After removing everything except RAM, the CPU and fan are still active, which suggests the power supply or motherboard is not delivering enough voltage or is faulty. Check the PSU connections and ensure it’s properly seated. Also, verify that the motherboard’s BIOS is recognizing the system and that all components are correctly installed.

OogaWooga

03-07-2023, 08:34 AM #1

BraydenKerr14
Junior Member

03-08-2023, 08:51 PM

Missed attaching images to the primary update.

BraydenKerr14

03-08-2023, 08:51 PM #2

Missed attaching images to the primary update.

ellarem
Member

127

03-16-2023, 04:22 PM

Install a cooler for the CPU. The issue is missing the 8-pin power connection at the top left.

ellarem

03-16-2023, 04:22 PM #3

Install a cooler for the CPU. The issue is missing the 8-pin power connection at the top left.

Jelmerro
Member

202

03-23-2023, 06:13 PM

I removed the cooler to make it easier to take out the RAM, but kept the fan connected to avoid triggering the light. The CPU indicator is now off, though the RAM indicator remains. Thanks for your assistance—it's your first project!

Jelmerro

03-23-2023, 06:13 PM #4

CreePxSh0tz
Junior Member

03-25-2023, 12:15 AM

Adjusted the RAM placement, so proceed to reset CMOS. Refer to page 28 of your motherboard guide. You might not have the specific jumper, but using a screwdriver to touch the pins will achieve the same result. Also verify that the RAM is securely installed. It seems it’s only partially inserted.