I adjusted the pins on the USB 3.2 Gen 2 blue cable
I adjusted the pins on the USB 3.2 Gen 2 blue cable
As long as the pin remains bent rather than broken, you should be able to repair it. Using tweezers and maintaining a steady hand can straighten it enough to properly seat the cable. I've fixed several of these connectors before, and it's manageable (though not as simple as fixing CPU/LGA pins). It seems this issue likely isn't covered under warranty. It might be worth trying first—contact the manufacturer or service provider to see what they recommend.
It seems like only six pins are bent, which might be due to the photo angle—so the count could be off slightly. The situation isn't ideal, but it's better than bending all of them at once. I’d recommend removing the board now and working on positioning everything. This should simplify the process a lot.
Yes, you can use tweezers for this. Just handle the item carefully and remove it gently.
The slim models from the iFixIt set seem to be top quality (or at least popular in that look). It’s not overly complicated, but it demands patience and a steady grip. Play some soothing tunes to ease tension before you begin.
I think I need to remove the aio. I'll do it when I install the new PSU on Wednesday, then update.