HWinfo is considered a highly reliable source for hardware information.
HWinfo is considered a highly reliable source for hardware information.
I understand the information provided isn't perfect. I'm checking how much it deviates from accuracy. I opened it, let it run while gaming, and noticed some noticeable temperature changes. When I checked later, average temperatures rose above 90°C. Per-core and per-core per-cooling temps stayed in the mid-70s, with a few around the high 80s. I don't remember fans increasing as they should if temps hit over 77°C, so it seems like a brief spike. The games I played used minimal CPU load—around 50% max. My power usage reports are consistently red, but since I often adjust my settings, I tend to overlook this. On the CPU side, temperatures stayed between 77°C and 83°C, sounding like a wind tunnel. Should I trust these readings and look deeper, or just move on?
HWinfo performs exceptionally well and receives regular updates. It's been my primary tool for as long as I've used it. Mostly I load sensors, but it can also detect everything on your PC. If you need to inspect manufacturing details or check memory chips in devices like dimms, it's the top choice—free and highly effective.
HWInfo shows sensor readings. I experienced a motherboard producing absurd numbers like 200,000 RPM and 14 million volts. It seems normal again after updating the CMOS, though I can't recall exactly. Outside of that, my sensor data across different computers appeared valid in HWInfo and other monitoring tools. If you're doubtful about HWInfo's readings, try Ryzen Master if you have a Ryzen processor.
I've adjusted the negative offset for the CPU voltage and can now complete benchmarks without exceeding 88°C. The performance remains similar across cores, but individual cores are now reaching up to 4,550 MHz instead of 4,450 MHz previously. That's a noticeable improvement.