F5F Stay Refreshed Hardware Desktop How to resolve issues after a CPU swap?

How to resolve issues after a CPU swap?

How to resolve issues after a CPU swap?

Pages (3): Previous 1 2 3 Next
F
fsassault
Junior Member
11
06-05-2022, 11:23 AM
#11
The only thing remaining is to verify that PBO is turned off. Also, attempt the process without an OC on the memory. Use whatever defaults are available before applying an EXPO profile.
F
fsassault
06-05-2022, 11:23 AM #11

The only thing remaining is to verify that PBO is turned off. Also, attempt the process without an OC on the memory. Use whatever defaults are available before applying an EXPO profile.

D
Darkeos
Senior Member
538
06-05-2022, 11:59 AM
#12
Try one stick in slot 2 from the CPU; it might be Corsair memory. I don't personally use Corsair memory for Gigabyte, but
KLEVV BOLT X DDR4 16GB (2x 8GB) 3600MHz CL18 Gaming Memory RAM kit XMP 2.0 Non-RGB High Performance Overclocking 18-22-22-42
D
Darkeos
06-05-2022, 11:59 AM #12

Try one stick in slot 2 from the CPU; it might be Corsair memory. I don't personally use Corsair memory for Gigabyte, but
KLEVV BOLT X DDR4 16GB (2x 8GB) 3600MHz CL18 Gaming Memory RAM kit XMP 2.0 Non-RGB High Performance Overclocking 18-22-22-42

J
jeraleskillpro
Junior Member
18
06-05-2022, 03:43 PM
#13
It keeps crashing even with just one stick, and trying both options didn’t fix it. Would replacing the memory module solve the issue? I’m considering getting a new motherboard instead. Changing every other part didn’t help.
J
jeraleskillpro
06-05-2022, 03:43 PM #13

It keeps crashing even with just one stick, and trying both options didn’t fix it. Would replacing the memory module solve the issue? I’m considering getting a new motherboard instead. Changing every other part didn’t help.

S
shanenick923
Junior Member
8
06-19-2022, 08:19 PM
#14
Because the motherboard is working and Windows is loading, it’s probably not the main problem.
Other than the GPU, I’d have tested a different memory module before making changes.
RAM can be affected by static electricity—remember to ground yourself when handling it, right?
Does the system experience crashes when connected to the 1050 TI with the 2200G?
Are you using the GPU’s HDMI output or its DisplayPort?
Following your recent CMOS reset, please specify any UEFI settings you’re adjusting before starting Windows.
S
shanenick923
06-19-2022, 08:19 PM #14

Because the motherboard is working and Windows is loading, it’s probably not the main problem.
Other than the GPU, I’d have tested a different memory module before making changes.
RAM can be affected by static electricity—remember to ground yourself when handling it, right?
Does the system experience crashes when connected to the 1050 TI with the 2200G?
Are you using the GPU’s HDMI output or its DisplayPort?
Following your recent CMOS reset, please specify any UEFI settings you’re adjusting before starting Windows.

M
mcmack05
Member
199
06-19-2022, 08:59 PM
#15
Yes, I perform these actions before and during any operation inside the case.
No, it doesn't happen beforehand. Issues began only after swapping the CPU.
HDMI connection remains stable; no settings were altered post-CMOS reset on initial boot, but crashes persist.
I experimented with various PBO configurations—XMP off, PBO off, PBO off - XMP on—but the system still crashes randomly, sometimes after a few minutes and sometimes within an hour when idle, often immediately during gameplay.
No further advanced settings have been adjusted beyond these tests.
M
mcmack05
06-19-2022, 08:59 PM #15

Yes, I perform these actions before and during any operation inside the case.
No, it doesn't happen beforehand. Issues began only after swapping the CPU.
HDMI connection remains stable; no settings were altered post-CMOS reset on initial boot, but crashes persist.
I experimented with various PBO configurations—XMP off, PBO off, PBO off - XMP on—but the system still crashes randomly, sometimes after a few minutes and sometimes within an hour when idle, often immediately during gameplay.
No further advanced settings have been adjusted beyond these tests.

X
XRedbankzX
Member
50
06-20-2022, 09:07 PM
#16
Disable CSM support. Restart Windows 11. Keep PBO and EXPO/XMP disabled.
X
XRedbankzX
06-20-2022, 09:07 PM #16

Disable CSM support. Restart Windows 11. Keep PBO and EXPO/XMP disabled.

M
megaplayer9001
Junior Member
4
07-04-2022, 09:31 AM
#17
Once the new processor arrived and issues began, I installed a new drive with a fresh Windows 11 without CSM support, but it didn't resolve the problem. Should I try reinstalling it again?
M
megaplayer9001
07-04-2022, 09:31 AM #17

Once the new processor arrived and issues began, I installed a new drive with a fresh Windows 11 without CSM support, but it didn't resolve the problem. Should I try reinstalling it again?

J
JuicyKid
Junior Member
10
07-04-2022, 01:07 PM
#18
Always keep CSM support turned off for current operating systems.
If Windows 11 starts while CSM support is active, something is wrong.
Make sure you're not using MBR mode during installation; GPT will be used instead.
When CSM support is disabled, the system will default to GPT.
Edit: The choice between GPT/UEFI (non-CSM) or MBR/Legacy (CSM) depends on the installation media. Refer to the following post for details.
Apologies for any trouble caused.
J
JuicyKid
07-04-2022, 01:07 PM #18

Always keep CSM support turned off for current operating systems.
If Windows 11 starts while CSM support is active, something is wrong.
Make sure you're not using MBR mode during installation; GPT will be used instead.
When CSM support is disabled, the system will default to GPT.
Edit: The choice between GPT/UEFI (non-CSM) or MBR/Legacy (CSM) depends on the installation media. Refer to the following post for details.
Apologies for any trouble caused.

S
soldierman45
Member
152
07-04-2022, 09:57 PM
#19
Please note the requirement to mention GPT - UEFI (non CSM) when setting up your Windows Install drive. This detail should be included as emphasized in the image below. If you're employing rufus, the instructions remain consistent.
S
soldierman45
07-04-2022, 09:57 PM #19

Please note the requirement to mention GPT - UEFI (non CSM) when setting up your Windows Install drive. This detail should be included as emphasized in the image below. If you're employing rufus, the instructions remain consistent.

J
JamesHond7
Posting Freak
838
07-06-2022, 05:27 AM
#20
I've reinstalled Windows 11 without turning on CSM and installed all the drivers. I also purchased new RAM and swapped it in to eliminate any issues from my previous ones. Still, the problem persisted.
J
JamesHond7
07-06-2022, 05:27 AM #20

I've reinstalled Windows 11 without turning on CSM and installed all the drivers. I also purchased new RAM and swapped it in to eliminate any issues from my previous ones. Still, the problem persisted.

Pages (3): Previous 1 2 3 Next