F5F Stay Refreshed Power Users Overclocking How to overclock a 10700K?

How to overclock a 10700K?

How to overclock a 10700K?

S
Scarator
Junior Member
9
08-20-2020, 10:17 AM
#1
Hello.
I'm working on an 10700K and planning to overclock it to 5.0.
I'm a bit confused because the voltage feels too high, or maybe it's not, I'm not sure. That's why I'm reaching out for advice.
I tried BIOS self overclock with two profiles: Gaming Profile (+1) and Advanced Profile (+3, +0.3).
However, during a CPU STRESS TEST, temperatures reached up to 92°C.
The results were shown here: 92C with up to 1.440V.
I'm wondering if this is safe and if I should stick with these settings. What do you think?
S
Scarator
08-20-2020, 10:17 AM #1

Hello.
I'm working on an 10700K and planning to overclock it to 5.0.
I'm a bit confused because the voltage feels too high, or maybe it's not, I'm not sure. That's why I'm reaching out for advice.
I tried BIOS self overclock with two profiles: Gaming Profile (+1) and Advanced Profile (+3, +0.3).
However, during a CPU STRESS TEST, temperatures reached up to 92°C.
The results were shown here: 92C with up to 1.440V.
I'm wondering if this is safe and if I should stick with these settings. What do you think?

D
DriveIn
Senior Member
739
09-04-2020, 06:31 PM
#2
1.44 is significantly too high for the CPU voltage. It may reduce its lifespan. 1.34 is acceptable. However, you should consider using a cooler for overclocking the CPU. At the very least, increase your CPU fan speed for better cooling if possible. Maintaining temperatures around the 70s is ideal.
D
DriveIn
09-04-2020, 06:31 PM #2

1.44 is significantly too high for the CPU voltage. It may reduce its lifespan. 1.34 is acceptable. However, you should consider using a cooler for overclocking the CPU. At the very least, increase your CPU fan speed for better cooling if possible. Maintaining temperatures around the 70s is ideal.

J
jmodkiller
Member
212
09-12-2020, 10:47 AM
#3
I have a 360AIO from coolermaster.
I aim to achieve more stable lower voltage.
J
jmodkiller
09-12-2020, 10:47 AM #3

I have a 360AIO from coolermaster.
I aim to achieve more stable lower voltage.

K
Kuji
Member
133
09-15-2020, 05:39 PM
#4
Put LLC should be set at 50-66%. In certain bios this corresponds to level3, while others are reversed, indicating level2.
K
Kuji
09-15-2020, 05:39 PM #4

Put LLC should be set at 50-66%. In certain bios this corresponds to level3, while others are reversed, indicating level2.