How to OC?

Alsphinx
Junior Member

12-12-2018, 09:53 AM

Hello,
Someone suggested I download Ryzen Master to overclock my graphics card.
But I’m not sure what to do inside it.
I just want to boost my iGPU performance.
Can you help me?
Here’s a picture of what Ryzen Master shows me:
I don’t know what changes to make, please assist.
My specs are:
Ryzen 5 2400g
MSI B450 Pro vdh plus mobo
2x8gb 3200mhz gskill ram
Thermaltake 450w psu
Coolermaster 310c case

Alsphinx

12-12-2018, 09:53 AM #1

xOrbital_
Member

12-13-2018, 08:03 AM

Set APU GFX Clock to 1400 and adjust the voltage to 1.2.
Download
Furmark for testing purposes. Open Furmark, choose your monitor resolution, and press 'Custom preset' or pick a ready-made one like HD or FullHD. If the test completes successfully, return to Ryzen Master and raise the overclock by 10MHz. Re-test. Continue this process until you encounter failure. You should be able to push the CPU to around 1500-1600 MHZ.
You may reach an overclock of up to 4.0ghz at a voltage of 1.38. Make sure to increase by small steps and it will work.

xOrbital_

12-13-2018, 08:03 AM #2

SpakmenRus2012
Member

232

12-18-2018, 07:26 AM

I wouldn't suggest Furmark unless you're okay with a dead GPU.
Check if Unigine Superposition is available for free and see if any 1080p versions exist.

SpakmenRus2012

12-18-2018, 07:26 AM #3

I wouldn't suggest Furmark unless you're okay with a dead GPU.
Check if Unigine Superposition is available for free and see if any 1080p versions exist.

Simonlo02
Junior Member

12-19-2018, 08:48 PM

Just want to adjust the GPU frequency to around 800-1000MHz. It's currently at 400MHz, so changing it would require a voltage of about 1.2.

Simonlo02

12-19-2018, 08:48 PM #4

Just want to adjust the GPU frequency to around 800-1000MHz. It's currently at 400MHz, so changing it would require a voltage of about 1.2.

mic8ro
Junior Member

12-19-2018, 10:39 PM

Thanks for the link and your reading...
As far as I comprehend, Furmark kill GPU when we increase settings.
If you just want to lower your GPU frequency to 800 MHz (currently at 400 MHz), it shouldn't be an issue.
Regarding voltage, if you do OC at 800 MHz, consider setting it to 1.2.

mic8ro

12-19-2018, 10:39 PM #5

icantswim
Member

112

12-19-2018, 11:58 PM

Furmark is capable of causing damage at stock configurations. I don't own or have used an APU, so I can't assist with that. For guidance, check the following link: https://www.reddit.com/r/Amd/comments/87...ttings_at/

icantswim

12-19-2018, 11:58 PM #6

Stromineur
Member

206

12-21-2018, 03:12 PM

I realized my GPU is currently at 1240 MHz.
I want to raise it to 1400 MHz safely.
Can you guide me through the steps in Ryzen Master for this adjustment?

Stromineur

12-21-2018, 03:12 PM #7

I realized my GPU is currently at 1240 MHz.
I want to raise it to 1400 MHz safely.
Can you guide me through the steps in Ryzen Master for this adjustment?

AgusCampoGF
Junior Member

12-24-2018, 05:07 PM

I don't understand. Someone else should assist you. Look for videos on YouTube about Ryzen 2400g and Ryzen master.

AgusCampoGF

12-24-2018, 05:07 PM #8

I don't understand. Someone else should assist you. Look for videos on YouTube about Ryzen 2400g and Ryzen master.