How to link the Frostflow 240L liquid cooling unit.
How to link the Frostflow 240L liquid cooling unit.
Hi,
I bought the Frostflow 240L liquid cooling unit and am trying to install my new PC. The cooling system has two fan headers—one 3-pin and another 2x4-pin for two fans. I also found a splitter designed for two fans. My motherboard has four 4-pin fan headers: one for the CPU and three for case fans. Could you advise on how to connect these fan connectors?
'Performs really well' isn't quite accurate when comparing closed loop coolers with good air coolers versus full water cooling loops. You're spending over $100 for a closed loop cooler that works similarly to an affordable air cooler priced around $30 or less. The main concern here is whether you're just labeling yourself as using 'liquid cooling' or genuinely aiming for optimal performance within your budget. If not, the product site and manuals should explain proper setup and configuration; otherwise, it seems the responsibility lies with the manufacturer to ensure clear communication to customers.
the optimal method is to bring it back to the shop and obtain a high-quality air cooler at a better price than this product. if you still want to use it: simply link the fans via the included splitter to any MB header and connect the pump to another header – likely the CPU should be used for the pump.
I don't get why you dislike the Frostflow 240L, people say tests show it works just fine, not worse than other models. He didn't compare AIO with air; he wanted to know how to install it.
For installation: connect the pump to your CPU Fan Header because the PC won't boot if it can't find anything there. Once that's done, plug the two fans into the Y cable (the splitter) and then link it to the most suitable 4-pin slot on your motherboard.
I strongly suggest using SpeedFan for fan control, though some find it too complicated to set up. If your motherboard manages the fans via BIOS, you won't need to do anything extra beyond connecting everything.
'Performs really well' isn't quite accurate when comparing closed loop coolers with good air coolers or full water cooling loops. You're spending over $100 for a closed loop cooler that works similarly to an affordable air cooler priced under $30, or even less.
The main concern here is whether you're just labeling yourself as using 'liquid cooling' without truly aiming for optimal performance at your budget.
If you're not following the setup and configuration guidelines on the product site, it's likely the responsibility of the manufacturer to ensure clarity for users. While Google can help, the information should already be available in the documentation.
I believe you both have strayed off topic. He has already purchased the Frostflow. What matters more is that it works much better than other AIOs of similar size. Your thoughts on it compared to a $30 air cooler are interesting, but I won’t jump into examples just yet. This isn’t the main focus of the thread D:
I think we both expressed an opinion along the answer to a question.
And no, I don't "hate" this crap - it's too much of a feeling towards something that is not even human.
It's just I find funny that very cheap to make crap can go as high in price as 160USD for Krapen X62. That's simply ridiculous. And there is no way to explain it's existence beyond not so smart people buying into marketing BS.
It's important to discuss this with yourself before buying something. Everyone tends to get caught up in marketing claims like 'any liquid cooling is great,' which isn't entirely accurate. We often compare products without considering other factors such as cost and performance. The manufacturer should provide clear information about connectivity and setup, or users should look it up online. Ultimately, it's the user's responsibility to understand what they're getting. Self-education can be very useful in this case.
Thank you for your message.
I have purchased this device before. However, I aim to find the most effective method. The instructions only cover CPU setup.