How to install a 4$ cpu water block without any mounting options?
How to install a 4$ cpu water block without any mounting options?
I just purchased an aluminium water block on eBay for 3.5$. It doesn’t have any mounting holes. Can you suggest a budget-friendly way to install it?
I would handle those blocks with great care.
Understand this, you pay what you get. They function as simple hollow containers with a minimal maze design, lacking a pin matrix or fin assembly, resulting in limited thermal absorption. The construction uses more than one piece, which is noticeable at the seams along the edges. Unlike high-quality blocks that rely on extensive R&D and quality checks, these are built without such emphasis. For $4, I’d consider them acceptable.
I wouldn’t claim they’re CPU blocks, but it’s clear anything can serve as a generic block. The ports are positioned on the sides, which deviates from typical CPU block design; they feature ports on top for convenient access...
I admit it’s possible to find ways to fix it, but I won’t share them.
This device is a costly mistake waiting to occur, even with high-quality components, because parts can fail over time and leaks often cause serious damage—typically draining CPU/MB and sometimes completely destroying the system, including the GPU.
I get the difficulty of a large do-it-yourself upgrade, but you’re putting yourself in danger. Save yourself the trouble; invest in a better water block and avoid mixing metals in the loop. Either stick to all copper or all brass, or all aluminium—including the fittings—and check out 'galvanic corrosion' to understand why.
it shouldn't be placed close to your computer. this item poses several risks. and the main weakness is that it doesn't really provide a good cooling effect.
I recently purchased an aluminium water block on eBay for 3.5$. It comes without mounting holes or anything. Do you know how to install it affordably?
"I could probably figure it out," I think.
But I wouldn't. Not for any system I truly intended to use.
What made you think this would suit your needs?
Just because something exists doesn’t mean it’s practical.
You’re lucky you spent only $4 on it.
Toss it away.
n0ns3s:
you shouldn't place it close to your computer.
this device poses several risks. The main issue is that it doesn't really cool, and the worst part is that the leak isn't a major concern since everything is protected by a silicon layer or similar over each component.
😉
When testing, use zip ties. The leak isn't a serious issue right now. I don't know exactly what you've secured, but make sure you're careful with important work you can't afford to lose.
I would handle those blocks with extra care.
Understand that quality varies—most of these are constructed from several pieces, backed by extensive research and testing. At around four dollars, I’d expect to find none of that refinement.
It’s not accurate to label them as a CPU block; in fact, they could easily be considered generic components. The orientation of the ports on the sides is unusual for CPU blocks, which typically place ports on top for better tubing access. This design seems more aligned with a GPU component. When I describe them as resembling a certain type, it’s mostly because they don’t closely match the expected appearance of a genuine block.