How to increase the clock speed of your AMD A10 7800 processor
How to increase the clock speed of your AMD A10 7800 processor
I can help you with overclocking your CPU. Here’s some guidance based on the links you shared.
Increase both voltage and clock gradually, testing stability in Windows. If successful, continue raising them further. The recommended safe and maximum voltage increase can be discovered by checking relevant forums.
George Phillips suggested adjusting voltage and clock gradually while testing stability in Windows. If successful, further increases can be made. He recommended looking up the safe and maximum voltage values in forums for guidance.
Only a few models can be overclocked, specifically the 10 7850k and 7870k. The 7800 is the standard version of the Kaveri A10 7000 series.
For thorough stability evaluation in Windows, it is advised to execute Prime 95 for a minimum of an hour. Any instability will result in errors within the program. Utilize all available processor threads and confirm they remain active after testing. If a thread terminates or the system crashes, it indicates instability.
For memory stability, Memtest86 is suggested. For graphics stability, Furmark should be used cautiously, limiting sessions to no more than 10 minutes to avoid potential damage.
When employing AMDOverdrive to assess stability across speed increments, expect the evaluation to last approximately half an hour to 40 minutes. Upon reaching its peak performance, the system may become unresponsive or crash. Therefore, monitor the Overdrive applet closely and reduce the reported maximum by .2 units. After that, restart your system and enter BIOS settings. For A10 APUs, it's advisable to keep the core voltage increase below 0.125 volts. Although the exact default is uncertain, I estimate it to be around 1.280 volts, so avoid exceeding 1.405 volts. Adjust the NB Ratio to 110 MHz and run the multiplier up to, for example, 37 or 38, which should yield a stable around 4.0 GHz. As George Phillips advises, use Prime 95 for 60 to 90 minutes to verify stability, ensuring no changes were made to the OC settings.
Also note that the Overdrive applet appears to be from an outdated version of Catalyst Suite. Be sure to install the most recent drivers for your hardware. (It seems compatible only with Catalyst, so consider the version released in October 2015—the 'Final Product' release prior to the Crimson Drivers update.) Good luck and have fun!
I want to increase my CPU's performance, could you assist me?
Here is a picture: http://imgur.com/JQKywHi
I discovered something called AMD overdrive. I aim to set it to 3900 and need guidance on voltage adjustments. http://imgur.com/4ZjUb2W
My processor has a locked multiplier, so I'm sorry, overclocking isn't possible.