How to increase performance of Zotac 1060 3gb single fan board
How to increase performance of Zotac 1060 3gb single fan board
I have a GTX 1060 with 3GB single fan version reference
https://dl.flipkart.com/dl/zotac-nvidia-...t.share.pp
It's not an OC or SC edition
I have a G4560
8GB of RAM
MSI H110 Pro VDHP (special mobo won't be found online)
The CPU might restrict any improvements in FPS during actual gaming, making the upgrade less worthwhile. The GPU performance should also be modest at best. If you decide to proceed, install MSI Afterburner for overclocking and Furmark for benchmarking. Begin with Furmark at 1080p settings to check FPS and temperature. Then switch to Afterburner, setting a custom fan curve—starting with 25% up to 50%, then 50% at 60%, 75% at 68%, and full at 80%. Increase the power limit to maximum, clock speed to +150, and memory to +500. Running a 1080p test in Furmark should add roughly 10 FPS. Keeping temperatures below 70°C indicates good stability.
Your GPU is likely to get hot easily because it doesn’t have much cooling. There’s limited room for overclocking. You might try installing the ASUS GPU Tweak II app from their site and use the built-in overclock settings—it’s a gentle boost and won’t harm your GPU. Avoid setting very high numbers unless you have good CPU cooling, such as liquid cooling fans. For safe and stable overclocking, consider using Asus GPU Tweak 2 for automatic adjustments. If you want to test stability, try Prime95 or 3DMark.
The CPU might restrict your potential improvements in FPS during actual gameplay, making it uncertain if upgrading is worthwhile. The GPU should not be expected to deliver significant performance boosts either. If you decide to proceed: install MSI Afterburner and Furmark for optimization and testing. Begin with Furmark at 1080p settings to check FPS and temperature. Then switch to Afterburner, setting a custom fan curve—starting at 25% up to 50%, then 50% at 60%, 75% at 68%, and full power at 80%. Increase the power limit to maximum, clock speed to +150, and memory to +500. After that, run a 1080p test in Furmark, which should add roughly 10 FPS if temperatures remain below 70°C. The most important phase is during gameplay; if everything runs smoothly, you can gradually increase the core clock by small increments, though gains will likely be limited. Prime95 is intended for CPU stress testing and not for GPU evaluation.
Valley Benchmark is used to push CPU limits during overclocking tests.