How to increase performance of FX 6100

212

01-21-2016, 08:47 AM

I have an AMD FX 6100 and intend to overclock it, so... My motherboard is a Gigabyte 990FX UD3, and I’m not sure how to use the BIOS from it. Can someone assist me? What changes should I make? I tried with a 6300 and it didn’t work. I hope someone can guide me through that strange BIOS.

cursayerdragon

01-21-2016, 08:47 AM #1

LOVAC13
Member

108

01-28-2016, 10:32 AM

BIOS is straightforward. For the FX, simply increase the multiplier above the standard boost clock of 3.9 (CPU Clock Ratio) and adjust the correct CPU voltage (System voltage control).

LOVAC13

01-28-2016, 10:32 AM #2

BIOS is straightforward. For the FX, simply increase the multiplier above the standard boost clock of 3.9 (CPU Clock Ratio) and adjust the correct CPU voltage (System voltage control).

Maail99
Member

161

02-02-2016, 01:48 AM

I got a watercooler

Maail99

02-02-2016, 01:48 AM #3

I got a watercooler

CaneRules
Junior Member

02-04-2016, 12:25 AM

I believe the setup remains identical with the same MB but using the FX 6350 at 4.9GHz, achieving a CPU Clock Ratio of 49 and 1.5v. You might try starting with a multiplier of 40 and 1.45v.

CaneRules

02-04-2016, 12:25 AM #4

I believe the setup remains identical with the same MB but using the FX 6350 at 4.9GHz, achieving a CPU Clock Ratio of 49 and 1.5v. You might try starting with a multiplier of 40 and 1.45v.

Freakiiianyx3
Senior Member

694

02-04-2016, 03:57 AM

Thx a lot m8 b)

Freakiiianyx3

02-04-2016, 03:57 AM #5

Thx a lot m8 b)

itzMikaHackzZ_
Member

193

02-04-2016, 07:37 AM

6300 can hit 4.6ghz at 1.4v, so why rush to start at 1.45?

itzMikaHackzZ_

02-04-2016, 07:37 AM #6

6300 can hit 4.6ghz at 1.4v, so why rush to start at 1.45?

Russian_Kanye
Junior Member

02-04-2016, 12:28 PM

After stable operation near maximum voltage, reducing the voltage becomes simpler than incrementally seeking the highest OC setting. Also, 1.45v isn't unreasonable for a bulldozer.

Russian_Kanye

02-04-2016, 12:28 PM #7

After stable operation near maximum voltage, reducing the voltage becomes simpler than incrementally seeking the highest OC setting. Also, 1.45v isn't unreasonable for a bulldozer.