How much I can overclock my CPU Q6600 - Help
How much I can overclock my CPU Q6600 - Help
Specifications -
- Processor - Core 2 Quad q6600 2.4 - 8 Mb Cache L2 Data Cache Size 4 x 32
L1 Instructions Cache Size 4 x 32
L2 Unified Cache Size 2 x 4096
- Link -
http://ark.intel.com/products/29765/Inte...66-MHz-FSB
- Motherboard - Gigabyte GA-G31M-ES2L rev 2.x
- RAM - DDR2 4Gb - Kingston 2gb ddr2 800mhz
- Graphics Card - Ati Radeon Sapphire HD 5870 1Gb 256bit
- Power supply - MS Inustrial - Model - FSP-400
AC INPUT 200-240v - 3A, 50-60Hz
DC OUTPUT 400w
80C is quite warm, so upgrading your cooling system might be a good idea.
But it should work as long as it stays under that limit. Intel CPUs usually begin throttling when temperatures reach about 90-105°C, though many suggest keeping them below 70°C. You're currently below the threshold where they shut down, but still above the advised range.
lfkfkfkffs :
Do you even have a aftermarket cooler?
I have something like this - maybe little biger - IDK the name - no sticker on him
https://postimg.org/image/h0gerz5c5/ -
https://postimg.org/image/90b5wkz6d/ - NO Problem with him -
Similar to all these "how much can I OC this CPU" inquiries, the outcome varies. Each processor behaves differently, so your Q6600 could achieve a different top speed compared to your two Q6600s. Also, check if your chip uses a B3 or G0 stepping—this can influence the available overclocking margin (G0 models generally perform better due to cooler operation and lower power draw).
You're likely to hit the limits set by the stock cooler, and the motherboard isn't ideal for high-end overclocking either.
Most Q6600s are capable of reaching 3GHz easily, but even with a superior cooler, you probably won't surpass that on your board—3GHz needs a 333MHz FSB, while G31 boards usually cap around 340-350MHz.
Monitor your temperatures closely and aim to stay below about 70°C.
Like all these "how much can I OC this CPU" queries, the outcome varies. Each chip behaves differently, so your Q6600 could achieve a different top speed compared to your two Q6600s. Also, check if your chip uses a B3 or G0 stepping—this affects overclocking potential. Generally, you’ll be constrained by the stock cooler and the motherboard’s capabilities. Most Q6600s can reach 3GHz easily, but even with a better cooler, you likely won’t surpass 340-350MHz on the G31 board. Watch your temperatures, aiming for around 70°C max.
Your chip is (GO) – I recently OC'd it to 3.ghz and got a max temperature of 80°C in-game. Is that acceptable?
As I mentioned, it could work, but it really depends on the specific chip. It needs to handle that speed, the right voltage, and whether your cooler can manage the extra heat. It should likely reach 3GHz without too much trouble, though it might not always be the case. The best way to confirm is to test it.
As mentioned, it might work depending on the specific chip – its ability to run at that speed, the voltage requirements, and the cooler's capacity to handle extra heat. It should likely reach around 3GHz without issues, but it could vary. The best way to confirm is to test it.
80C is quite warm, so upgrading your cooling system might be a good idea.
But it should work as long as it stays under that limit. Intel CPUs usually begin throttling when temperatures reach about 90-105°C, though many suggest keeping them below 70°C. You're currently below the threshold where they shut down, but still above the advised range.