How far can I Oc my ram?

sas_a_fras_04
Junior Member

04-29-2016, 03:48 AM

Hey, I'm looking into ways to push my RAM beyond the XMP settings. Can I go higher than 3000MHz while keeping stability? I'm currently using 4 modules, 32GB with XMP enabled. My RAM shows DDR4-2666, CL15-15-35, 1.2V Intel XMP 2.0. Anyone have tips on reaching higher speeds safely? Thanks!

sas_a_fras_04

04-29-2016, 03:48 AM #1

Mr_5bz
Junior Member

04-29-2016, 07:39 AM

You can push it to its limits as long as it stays steady. Boost the RAM rate and check if the system operates smoothly. If it fails, lower it back.

Mr_5bz

04-29-2016, 07:39 AM #2

You can push it to its limits as long as it stays steady. Boost the RAM rate and check if the system operates smoothly. If it fails, lower it back.

Kot_Kotov666
Junior Member

04-29-2016, 07:55 AM

Adjust the frequency to 2800 or 3000mhz and keep the rest unchanged.

Kot_Kotov666

04-29-2016, 07:55 AM #3

Adjust the frequency to 2800 or 3000mhz and keep the rest unchanged.

PaxTheEnderman
Member

05-01-2016, 12:34 AM

Adjustments needed, timing and voltage will likely change. You might reach 3200Mhz by relaxing the settings and increasing the voltage.

PaxTheEnderman

05-01-2016, 12:34 AM #4

Adjustments needed, timing and voltage will likely change. You might reach 3200Mhz by relaxing the settings and increasing the voltage.

kittymitty69
Member

190

05-06-2016, 07:38 PM

You can begin there. Adjusting the voltage slightly higher might improve stability, though increasing it further adds more stress to the RAM module. This guide offers some overclocking tips. I'm heading out now, so I won't be able to respond right away. Best of luck!

kittymitty69

05-06-2016, 07:38 PM #5

Tommygirl123
Junior Member

05-06-2016, 09:28 PM

How much higher should the voltage be? It's currently at 1.2 volts.

Tommygirl123

05-06-2016, 09:28 PM #6

How much higher should the voltage be? It's currently at 1.2 volts.