How do I overclock my laptop?
How do I overclock my laptop?
I have an HP dv6 envy notebook running Linux Mint, and I'm attempting to boost my CPU performance.
Don't assume laptops can handle the heat or power needs. They're likely already restricted by the BIOS settings.
I agree with what was said. It's not worth it.
The balance of risk versus reward isn't good on laptops.
You get a 10% performance boost, but it shortens battery life and increases heat.
Risk leads to a dead laptop.
At least desktops let you replace the CPU or GPU if they fail.
Well, to start, you have to be aware of the consequences:
Lower Battery Life
Increased Thermals
However, there is an easy way to "overclock" your laptop. Some enthusiasts might not call this overclocking, but the end product results in a higher clock speed.
Don't worry about thermals too much. I have overclocked my Inspiron 11-3168 (which is passively cooled and has a 6th Gen, 4 Core Pentium N3710
So, here's what you do if you really want to 'overclock' your laptop.
If you have Windows 10,8, or 7, search for "Power Options"
Then, you will see some options for power modes.
Click "show Additional Plans"
Click High-Performance mode.
This will boost your CPU to a higher clock speed depending on how intensely you use your computer. It will boost a lot higher than maximum clock speed, and it really helped for me, as my computer used to be slow as crap. Now, however, it actually works.
Thanks, and hopefully you found this helpful.
Lemar Bonquiqui :
TJ Hooker :
@Lemar Bonquiqui your N3710 boosting level?
I've noticed the best I've seen for a Pentium was 2.43Ghz, which is a significant increase if you consider it... particularly for a CPU that's locked and cooled passively.
The typical boost frequency for this chip reaches up to 2.56 GHz... you didn't actually overclock it. It seems the setting to High Performance power plan is forcing it to run at high speeds constantly, which raises temperatures and shortens battery life. Even on Balanced mode, it should adjust the frequency based on demand.
http://ark.intel.com/products/91830/Inte...o-2_56-GHz
TJ Hooker :
Lemar Bonquiqui :
TJ Hooker :
@Lemar Bonquiqui your N3710 boosting level? The best I've observed the Pentium reach was 2.43Ghz, which is a significant increase if you consider it... particularly for a CPU that's locked and cooled passively.
The typical boost frequency for this chip reaches up to 2.56 GHz... you didn't actually overclock it. I'm certain what you've done by setting it to the High Performance power plan is keeping it running at high speeds constantly, which raises temperatures and shortens battery life. Even on the Balanced setting, it should adjust the frequency as needed when under load.
http://ark.intel.com/products/91830/Inte...o-2_56-GHz
I need to disagree, my friend. As you're aware, I'm using a laptop version of the Pentium... The maximum clock speed listed is 1.60Ghz according to Windows, CPU-Z, and the BIOS. And while the peak frequency can reach around 2.6Ghz, I'm satisfied with the performance it delivers. Of course, if the laptop is very power-constrained and budget-focused, and comes with only 4 GB of RAM, it limited my ability to push the CPU to its limits. Still, in the end, this processor isn't intended for overclocking—it just offers a performance boost. And as I mentioned in my original comment and this discussion... it's not even regarded as real overclocking.
Thanks
Lemar Bonquiqui responded to the discussion about the N3710 boosting performance, noting that the standard boost clock reaches up to 2.56 GHz. He mentioned using a laptop version of the processor, which has a maximum clock speed of 1.60 GHz according to various tools. He expressed satisfaction with the results despite the lower base clock, especially considering the device's power constraints and RAM limitations. He also suggested testing benchmark tests in both Balanced and High Performance modes to confirm consistent performance.