Hot swap keyboard ?
Hot swap keyboard ?
I have a question about hot swap keyboards.
Are there any options similar to a plug that you can insert into a switch location without needing a switch or key?
For instance, if you don’t want to use your direction pad on the keyboard but also avoid leaving the socket exposed and letting dust in.
Switch, plug, detachable direction pad? Keyboard make and model? Could you share a few photos here on imgur? That’s why it might be better to just cover the open port with a small piece of masking tape.
Tape could work, But I'm looking for something to put in the switch socket that also makes it flush to the board.
I don't need it for my current board (since its budget) its for future project since I'm looking at those split keyboard for myself but since they do not come in the same layout as a full sized keyboard. (I could just by one of those full size membrane ergo keyboards and get close to what I want but no) and some of those have keys in strange places that I don't want/will use. So that why I asking about if there is a plug for that.
Ill throw in a visual example (image i found on google)
https://imgur.com/WEyUx8V
View: https://imgur.com/WEyUx8V
If I got this type of keyboard, I wouldn't want the keys I've crossed out and would want something in the socket to make it flush with the plastic.
I know i could use a program to disable those keys but I don't want them on the board itself .
Effectively im hunting for a hotswap ero/split board that around the size of a mini BUT has all the F keys at the top
Examine mechanical switch keyboards, many of which feature detachable switches, and there are also kits available for you to personalize.
For example
https://mechanicalkeyboards.com/?srsltid...6kzXnMNRlQ
https://www.amazon.com/Mechanical-Keyboa...yboard+Kit
Removable switches (per
@CountMike)
seem to be the best choice.
Even after removing the key caps, the switch stems should likely rise above the keyboard surface.
Thus, you’d have to take out the switches, leaving only the gaps.
I’d also expect these gaps could be hidden for a cleaner look and to prevent dirt from getting in.
= = = =
Still, I’d be careless not to mention the issue of keys that are in unusual locations and might not be wanted or used.
What’s holding you back from just skipping those keys? Are you worried about accidental presses? Could it be the design?
I’m just curious about the project without being overly specific.
Also, given how things usually go, you might find those keys useful again later....
Mr. Murphy enjoys projects.
In any case, you could (as noted) apply code to disable those keys. This gives the benefit of easily reversing or adjusting key behavior.
Think about it: if something isn’t working, it’s likely the keyboard mods or similar aren’t the problem.
My advice is to try getting the project up and running first.
Then address keys, keyboards, cosmetics, etc. later—when needed.
I think I am explaining this wrong.
This is a question for hotswap keybaord
I have a hotswap keyboard. (broken because I spilt liquid all over it)
I have plenty of switches.
I have plenty of keycaps .
Im looking to buy a new keyboard around the size of a mini keyboard, But I want F keys (normal mini keyboards don't have F keys)- Problem is the only keyboards I've found that are around that size with F keys have extra keys that I don't need, like the one I posted above. - Don't need the direction keys pgup\home\isr\prints etc (that whole right side of a keyboard)
That why I was asking about if there is something out there that seals the hole when you don't have a switch in it. Since I couldnt find what im looking for during my searches
I dont want to have a keyboard with random gaffa tape covering open slots hence why I was asking if there was a plug or something (the only word I can think of that describes it)
Considering the constraints, I performed a quick online search for DIY keyboard build kits. I didn’t find any that included plugs or protective covers for unused key areas. Would blank caps be a viable option? A variety of styles and colors, such as clear or crystal, are available. You might be able to create these plugs yourself using a 3D printer, which would require some effort starting with setting up the printer. Alternatively, someone could suggest other ways to cover the gaps, perhaps using tape. It’s simpler to just skip keys you don’t need or use until you decide otherwise.