Home network connection via Ethernet
Home network connection via Ethernet
Hi, I’ve got a setup with LCU6-10CC-0305-S and a full copper Cat 6A in the basement. The house spans three levels—two above-ground spaces each about 650ft² and one basement area of 650ft². There’s an 18u rack in the basement, fewer than 20 outlets, and only a few devices connected directly. The 4 APs are already wired, and the camera installation is ready. You’re considering TP-Link Festa FS352GP or Aruba Intant Go 1830 models. Since you’re open to used gear, I’ll suggest a switch that balances capacity and efficiency. With your power cost of 0.24€/kWh, energy-saving options like TP-Link’s PowerSaver or Aruba’s Energy Efficiency features would be wise. For Wi-Fi, 6 is fine for this setup; you won’t need Wi-Fi 7 unless you plan heavy bandwidth. Regarding cameras, the Aruba Intant Go series offers solid performance and good security. The fiber connection supports fast speeds, so your choice should handle the load without issues.
Well, the maker says I'm a bit behind schedule, but that explains why my contractor isn't setting up the Ethernet connection. If you need to ask, I'd advise avoiding HP Aruba unless you really need it—those products are solid, but only if they fit your needs. Do you plan to place the cameras on a separate network for security, or is the aim simply to link everything and let the cloud handle it? I’d recommend choosing the latest option that fits your budget, so you can use the same device for years. You're not just buying an access point for today’s use; ideally, it should last a decade. There are many paths here depending on your security goals—cheap options, self-contained units, premium models, and cloud-integrated systems. If you want, I can look into Ubiquiti as a possibility.
I understand we had a strong conversation with the contractor about this. The agreement called for Cat6 cabling. I've already purchased a decent option for the basement. A few cables in the house can be updated, but not those in the kids' rooms. I'm new to switches, so I'm still figuring things out. My priority is security, and I don't want camera traffic spreading through the whole network. That's why I considered using a VLAN or a dedicated switch. It makes sense. I'm searching for something affordable yet reliable—something around the price of a Toyota car. I've looked at Dahua and HikVision. I'm not fully convinced about the cloud solution, though I see its benefits. The offline option is appealing too. I'm not aiming for extra subscriptions or fees. Maybe? But why? All or just AP and cloud key?
LCU6-10CC-0305-S is a Cat6 but uses CCA wires (aluminum-clad copper). These have greater resistance, causing quicker signal loss over long distances—typically more than 30 meters. In theory, Cat6 supports up to 55 meters at 10Gbps, but with CCA cables it’s unlikely to reach that. A bigger issue is the basic PVC insulation; you’d prefer LSZH or similar fire-retardant materials.
I’m curious if you can isolate security cameras from the main cables leading to standard sockets. If so, would separate Ethernet cables be available for those areas? That might make it more cost-effective to use an 8-16 port PoE switch and a dedicated 24-48 port for rooms. A 10G switch could work too—though power use is higher (about 2–5W per active port). If you’re okay with used gear, consider examples from eBay UK (links provided).
From Udenhout, Netherlands: NETGEAR PROSAFE GS752TP V2 offers 48 ports, PoE+, supports up to 320W total. Avaya 4850GTS-PWR+ is another option with 48 ports and PoE+ capability.
UK sellers note that using these in Romania costs around £33, Poland similar, while US prices are lower.
For Romania: Switch X440-G2-24P supports 24x10/100/1000 PoE+, includes SFP+ ports, management features, and weighs 40kg. Shipping to Romania is about £33; Poland rates are comparable.
Extreme Networks Switch X440-G2-24P features 24 ports with PoE+, 10Gb Ethernet via licensing, 40kg weight, £40 shipping. Some users report configuration challenges and limited firmware updates for the back ports. Power draw is 35W minimum, 380W for PoE+.
TP Link TL-SG3424P JetStream offers 24 ports with 4 SFP and 4 shared SFP+ ports, supports up to 320W total, £380 shipping. It includes management via 802.3at/af and has a 10Gb port, but firmware updates may be restricted.
These models vary in design, cost, and suitability depending on your setup.
Replacement is proving challenging, and the pathways to the children's rooms are unattainable. The team buried the wires beneath the warm flooring. I’ve already purchased an Alantec KIF6ALSOH050D for my basement. Following a home disaster, I manage to salvage what I can. Each system has its own cables. I haven’t encountered any that aren’t expensive. I’d be interested in reviewing the offer and learning about local options.
I’m not familiar with Polish retailers, but the Netherlands, Germany, and the UK are nearby enough. Shipping costs would be reasonable and still cheaper than buying new hardware. For 10G switches, affordable options include Arista and Quanta models like the Arista DCS-7050TX. However, they use a lot of power—around 150–170 watts—and you’ll incur significant electricity expenses. You’d receive 48 ports at 10G and 4 ports at 40G, each of which can be split into four 10G+ with DAC cables. Poland seller: https://www.ebay.co.uk/itm/116822292249 UK seller: https://www.ebay.co.uk/itm/365187754940 German seller: https://www.ebay.co.uk/itm/116525404727 and others listed.
By random luck, I acquired an Aruba Instant On 1830 JL815-60001 revision 33 for around $110 USD. I’m unsure if it’s beneficial or not, but I don’t know. The gear seems in good condition, though it arrived repackaged despite being labeled with the Aruba logo. Now I’m looking for additional APs, preferably from Aruba for straightforward setup. Should I replace the Funbox7 or stick with this unit?