F5F Stay Refreshed Hardware Desktop High voltage Ryzen 5 3600 specifications

High voltage Ryzen 5 3600 specifications

High voltage Ryzen 5 3600 specifications

B
BoChesa
Member
73
11-03-2019, 07:43 AM
#1
I saw the stock settings showing voltages up to 1.5V across all cores, while the hardware monitor indicates 1.45V as the default. That’s a bit higher than expected. I’m worried since this is my second 3600 and the first one stopped working after a few months.
B
BoChesa
11-03-2019, 07:43 AM #1

I saw the stock settings showing voltages up to 1.5V across all cores, while the hardware monitor indicates 1.45V as the default. That’s a bit higher than expected. I’m worried since this is my second 3600 and the first one stopped working after a few months.

K
khaledkb_
Senior Member
724
11-03-2019, 11:06 AM
#2
Read idle voltage: 1.8V
Read full load voltage: 3.0V
K
khaledkb_
11-03-2019, 11:06 AM #2

Read idle voltage: 1.8V
Read full load voltage: 3.0V

F
FeedLaBiche
Member
60
11-03-2019, 02:21 PM
#3
I don't have access to the specific temperature readings of your old 3600 under load. Could you provide more details or check the relevant documentation?
F
FeedLaBiche
11-03-2019, 02:21 PM #3

I don't have access to the specific temperature readings of your old 3600 under load. Could you provide more details or check the relevant documentation?

I
iFitchy
Member
53
11-04-2019, 01:52 AM
#4
At maximum capacity it reads 1.137 while idle it displays 1.144
I
iFitchy
11-04-2019, 01:52 AM #4

At maximum capacity it reads 1.137 while idle it displays 1.144

S
SuperRxns
Member
102
11-04-2019, 02:48 AM
#5
I don't have that memory. This model has reached a peak of around 81°C, though it rarely exceeds the mid-70s.
S
SuperRxns
11-04-2019, 02:48 AM #5

I don't have that memory. This model has reached a peak of around 81°C, though it rarely exceeds the mid-70s.

_
_NovaApex
Junior Member
4
11-25-2019, 04:31 PM
#6
Are you certain the numbers aren't 1.37 and 1.44? They seem excessively low. My readings are around 0.750mV with a slight drop, about 1% loss. At 1mV I lose roughly 5%. Voltages appear high despite claims of being fine for short bursts. Right now my setup never exceeds 1.400V. Edited March 25, 2020 by lafrente Wrote V instead of MV
_
_NovaApex
11-25-2019, 04:31 PM #6

Are you certain the numbers aren't 1.37 and 1.44? They seem excessively low. My readings are around 0.750mV with a slight drop, about 1% loss. At 1mV I lose roughly 5%. Voltages appear high despite claims of being fine for short bursts. Right now my setup never exceeds 1.400V. Edited March 25, 2020 by lafrente Wrote V instead of MV

F
FunkyEx
Member
73
11-27-2019, 05:10 AM
#7
SVI2 reading in HWinfo refers to the voltage sense built into the CPU, which is accurate and really safe. I assume the 1.5V number is the VID? that's not what the CPU is actually receiving, so no worries there.
F
FunkyEx
11-27-2019, 05:10 AM #7

SVI2 reading in HWinfo refers to the voltage sense built into the CPU, which is accurate and really safe. I assume the 1.5V number is the VID? that's not what the CPU is actually receiving, so no worries there.

T
tensaimicky
Member
214
11-27-2019, 06:30 AM
#8
I was checking the incorrect option. The range is between 0.919 and 1.481v.
T
tensaimicky
11-27-2019, 06:30 AM #8

I was checking the incorrect option. The range is between 0.919 and 1.481v.