High voltage Ryzen 5 3600 specifications

BoChesa
Member

11-03-2019, 07:43 AM

I saw the stock settings showing voltages up to 1.5V across all cores, while the hardware monitor indicates 1.45V as the default. That’s a bit higher than expected. I’m worried since this is my second 3600 and the first one stopped working after a few months.

BoChesa

11-03-2019, 07:43 AM #1

khaledkb_
Senior Member

724

11-03-2019, 11:06 AM

Read idle voltage: 1.8V
Read full load voltage: 3.0V

khaledkb_

11-03-2019, 11:06 AM #2

Read idle voltage: 1.8V
Read full load voltage: 3.0V

FeedLaBiche
Member

11-03-2019, 02:21 PM

I don't have access to the specific temperature readings of your old 3600 under load. Could you provide more details or check the relevant documentation?

FeedLaBiche

11-03-2019, 02:21 PM #3

I don't have access to the specific temperature readings of your old 3600 under load. Could you provide more details or check the relevant documentation?

iFitchy
Member

11-04-2019, 01:52 AM

At maximum capacity it reads 1.137 while idle it displays 1.144

iFitchy

11-04-2019, 01:52 AM #4

At maximum capacity it reads 1.137 while idle it displays 1.144

SuperRxns
Member

102

11-04-2019, 02:48 AM

I don't have that memory. This model has reached a peak of around 81°C, though it rarely exceeds the mid-70s.

SuperRxns

11-04-2019, 02:48 AM #5

I don't have that memory. This model has reached a peak of around 81°C, though it rarely exceeds the mid-70s.

_NovaApex
Junior Member

11-25-2019, 04:31 PM

Are you certain the numbers aren't 1.37 and 1.44? They seem excessively low. My readings are around 0.750mV with a slight drop, about 1% loss. At 1mV I lose roughly 5%. Voltages appear high despite claims of being fine for short bursts. Right now my setup never exceeds 1.400V. Edited March 25, 2020 by lafrente Wrote V instead of MV

_NovaApex

11-25-2019, 04:31 PM #6

FunkyEx
Member

11-27-2019, 05:10 AM

SVI2 reading in HWinfo refers to the voltage sense built into the CPU, which is accurate and really safe. I assume the 1.5V number is the VID? that's not what the CPU is actually receiving, so no worries there.

FunkyEx

11-27-2019, 05:10 AM #7

tensaimicky
Member

214

11-27-2019, 06:30 AM

I was checking the incorrect option. The range is between 0.919 and 1.481v.

tensaimicky

11-27-2019, 06:30 AM #8

I was checking the incorrect option. The range is between 0.919 and 1.481v.