F5F Stay Refreshed Hardware Desktop High temperatures affect both stock and overclocked setups.

High temperatures affect both stock and overclocked setups.

High temperatures affect both stock and overclocked setups.

Pages (3): 1 2 3 Next
S
smilingskink
Member
52
11-17-2016, 04:13 AM
#1
The problem you're facing is that your I78700K operates around 70°C idle and jumps to 90°C during gaming, regardless of stock settings or 4.7 GHz. You've disabled MCH in BIOS but aren't sure of other adjustments. You're using a Corsair H100i for CPU cooling.
S
smilingskink
11-17-2016, 04:13 AM #1

The problem you're facing is that your I78700K operates around 70°C idle and jumps to 90°C during gaming, regardless of stock settings or 4.7 GHz. You've disabled MCH in BIOS but aren't sure of other adjustments. You're using a Corsair H100i for CPU cooling.

N
nathanmizzi
Member
127
11-17-2016, 07:27 PM
#2
Replace that cooler, just one unit. What kind of case and fan arrangement is it? Often the issue lies with the CPU cooler not being secured properly—maybe insufficient paste, old paste, or lack of pressure. A 240mm model works fine for the standard setup and should be sufficient for overclocking as well; I’ve used a 360mm version when running my 8700k at 5GHz, achieving temps in the low 60s under load.
N
nathanmizzi
11-17-2016, 07:27 PM #2

Replace that cooler, just one unit. What kind of case and fan arrangement is it? Often the issue lies with the CPU cooler not being secured properly—maybe insufficient paste, old paste, or lack of pressure. A 240mm model works fine for the standard setup and should be sufficient for overclocking as well; I’ve used a 360mm version when running my 8700k at 5GHz, achieving temps in the low 60s under load.

G
Gn0meChild
Member
121
11-17-2016, 10:27 PM
#3
Ensure proper airflow throughout the space.
G
Gn0meChild
11-17-2016, 10:27 PM #3

Ensure proper airflow throughout the space.

F
freythefab
Member
65
11-30-2016, 09:18 AM
#4
I’m certain my supporters were in the right place last week, which did help a bit after I made the change, though it wasn’t really obvious.
F
freythefab
11-30-2016, 09:18 AM #4

I’m certain my supporters were in the right place last week, which did help a bit after I made the change, though it wasn’t really obvious.

O
Ozwego
Member
191
12-02-2016, 10:21 AM
#5
I'll verify the thermal paste next. Regarding the overclocking settings, I don't have details—just checked some YouTube tutorials, but they weren't very clear. Stock options are usually safe unless you're unsure.
O
Ozwego
12-02-2016, 10:21 AM #5

I'll verify the thermal paste next. Regarding the overclocking settings, I don't have details—just checked some YouTube tutorials, but they weren't very clear. Stock options are usually safe unless you're unsure.

O
Okunino
Posting Freak
845
12-08-2016, 09:20 PM
#6
Also for the scenario with an NZXT H500i
O
Okunino
12-08-2016, 09:20 PM #6

Also for the scenario with an NZXT H500i

B
berke1010
Member
147
12-10-2016, 05:58 AM
#7
Manual Vcore is recommended. The auto setting tends to be too high.
B
berke1010
12-10-2016, 05:58 AM #7

Manual Vcore is recommended. The auto setting tends to be too high.

B
Broflash
Senior Member
740
01-01-2017, 12:33 AM
#8
Idle temps don't mean a whole lot, but I would say that 70c at idle indicates something's not right. Remount, make sure to use enough paste and tension.
B
Broflash
01-01-2017, 12:33 AM #8

Idle temps don't mean a whole lot, but I would say that 70c at idle indicates something's not right. Remount, make sure to use enough paste and tension.

Z
zFenix045_
Member
126
01-08-2017, 11:28 AM
#9
Try suggesting a simple starting point or a basic plan. This will help you begin with minimal effort.
Z
zFenix045_
01-08-2017, 11:28 AM #9

Try suggesting a simple starting point or a basic plan. This will help you begin with minimal effort.

A
adamgames2016
Member
133
01-09-2017, 03:11 PM
#10
I opted for the auto preset at 8700K with 5Ghz on my Gigabyte z370 board. They provide a manual that could assist... https://view.joomag.com/gigabyte-z370-ov...7695?short
A
adamgames2016
01-09-2017, 03:11 PM #10

I opted for the auto preset at 8700K with 5Ghz on my Gigabyte z370 board. They provide a manual that could assist... https://view.joomag.com/gigabyte-z370-ov...7695?short

Pages (3): 1 2 3 Next