F5F Stay Refreshed Hardware Desktop High-speed 3200mhz memory triggers a black display.

High-speed 3200mhz memory triggers a black display.

High-speed 3200mhz memory triggers a black display.

P
PepeTequila
Junior Member
12
05-01-2021, 10:17 AM
#1
Your system is set up with a strong i7 processor and ample RAM, but the boot issue suggests a deeper problem. Check the BIOS settings for any errors or mismatches, ensure all connections are secure, and verify that the RAM sticks are properly seated. If the problem persists after these steps, the hardware or firmware might need further troubleshooting.
P
PepeTequila
05-01-2021, 10:17 AM #1

Your system is set up with a strong i7 processor and ample RAM, but the boot issue suggests a deeper problem. Check the BIOS settings for any errors or mismatches, ensure all connections are secure, and verify that the RAM sticks are properly seated. If the problem persists after these steps, the hardware or firmware might need further troubleshooting.

I
ISY_0815
Senior Member
566
05-12-2021, 08:21 PM
#2
they are 4x8gb memory modules... from what I see online, you might need to reduce the RAM speed. The 7000 series CPU can manage fast RAM, but a 3200 MHz might be too high for a dual-rank setup. You’ll likely need to reset the CMOS first before it works properly.
I
ISY_0815
05-12-2021, 08:21 PM #2

they are 4x8gb memory modules... from what I see online, you might need to reduce the RAM speed. The 7000 series CPU can manage fast RAM, but a 3200 MHz might be too high for a dual-rank setup. You’ll likely need to reset the CMOS first before it works properly.

X
xXSuperNovaXx
Posting Freak
811
05-20-2021, 10:43 AM
#3
Reset the CMOS. Once cleared, adjust the DRAM voltage to 1.35, set VCC/SA to 1.1-0.2, then test at 3000 or lower frequency before increasing to 3200.
X
xXSuperNovaXx
05-20-2021, 10:43 AM #3

Reset the CMOS. Once cleared, adjust the DRAM voltage to 1.35, set VCC/SA to 1.1-0.2, then test at 3000 or lower frequency before increasing to 3200.

V
VeraquinGaming
Member
209
06-07-2021, 02:54 AM
#4
It seems you're facing issues with your PC not booting even after trying different voltage settings. Have you considered checking if the battery is properly seated or if there are any loose connections?
V
VeraquinGaming
06-07-2021, 02:54 AM #4

It seems you're facing issues with your PC not booting even after trying different voltage settings. Have you considered checking if the battery is properly seated or if there are any loose connections?

B
bengalwatcher
Posting Freak
801
06-13-2021, 07:55 AM
#5
If it's unstable, you'll need to reset the CMOS. You might want to update the BIOS and see if it works. Also, test one stick at a time.
B
bengalwatcher
06-13-2021, 07:55 AM #5

If it's unstable, you'll need to reset the CMOS. You might want to update the BIOS and see if it works. Also, test one stick at a time.

B
blackprince25
Junior Member
4
06-13-2021, 01:04 PM
#6
I attempted to download the latest mobile update from the ASRock website for Windows and installed it, but the device displayed a black screen instead.
B
blackprince25
06-13-2021, 01:04 PM #6

I attempted to download the latest mobile update from the ASRock website for Windows and installed it, but the device displayed a black screen instead.

_
_HarambeBoi_
Junior Member
23
06-13-2021, 04:11 PM
#7
You can review the options for updating the bios. As I mentioned, test it with one stick at a time.
_
_HarambeBoi_
06-13-2021, 04:11 PM #7

You can review the options for updating the bios. As I mentioned, test it with one stick at a time.